Scheiber MB-BOX - Acknowledgement; Safety Warnings; Related Accessories; Equipment Description

L’innovation française depuis 1965
P. 2
L’innovation française depuis 1965
Designation Reference
120Ω BUS CAN termination 0D.CRD399
Micro-Fit / M12 (NMEA) adapter 0D.CRD630
USB-card micro SD adapter 0R.INF420
USB-C / RJR45 adapter 0R.INT430
GPS antenna - 5M cord 0I.CED522
Power harness 0D.CRD310
Equipment description
The MB-BOX is a complete and scalable solution similar to a home automation box consisting of the physical MB-BOX box and,
optionally, dedicated applications. It can be integrated into land vehicles as well as boats, it centralizes all installation data, controls
equipment and carries out maintenance operations, all remotely and worldwide thanks to the 'application.
Acknowledgement
Thank you for your purchase and we hope that this product is entirely satisfactory.
Before you being using the product, we recommend that you read the following instructions carefully.
This manual explains how to use and install the product according to the use for which it was intended.
Safety warnings
IMPORTANT: Do not dismantle the device
Any contact with the components inside the product can cause injuries.
In the event of a malfunction, only a qualied technician is authorized to repair the device.
IMPORTANT: In the event of an impact
If the product falls or suers violent impacts, immediately contact a qualied person to make sure that the device is working
properly.
IMPORTANT: Unpacking the equipment
After unpacking the product, make sure that it is complete and in good condition: if in doubt, immediately contact someone with the
required professional qualication.
IMPORTANT: Unpacking the equipment
Do not leave any part of the packaging within the reach of children or irresponsible people.
Related accessories