6968
E
ADAPTION
INITIAL INSTALLATION
28. 29.
To set the end points the valve opens and closes several
times. The process may take several minutes.
If re-adaption is required: set the
menu on ADAP until adaption
starts again..
Error message E1: No adaption is possi-
ble. Please check the installation of the
wireless thermostat on the radiator.
Error message E2: Remove the wireless thermostat; briey
remove the battery to perform a reset.
Error message E3: No valve movement possible. Check the
mobility of the valve stem.
52
To Next Page
Loading...
Need help?
General