Scheppach 1901507901

EU-Conformity Declaration
scheppach Fabrikation von Holzbearbeitungsmaschinen GmbH
Günzburger Straße 69
89335 Ichenhausen
Deutschland
Representative: Reinhold Bauer
We, the scheppach Fabrikation von Holzbearbeitungsmaschinen GmbH, declare that the machine described below
Table band saw Basa 4.0, from Series number 1001, Article No. 1901504901, Article No. 1901504902
conforms to all relevant requirements of the EU-Machines Directives 2006/42/EG
Other EU directives: EU EMC Directive 2004/108/EWG
Place registered: Prüf- und Zertierungsstelle Holz im DGUV-Test
70563 Stuttgart, Vollmöllerstraße 11
(ID Number 0392)
Switched on for the: EC Type Approval Testing
Certications: EC Type Approval Certication (Ho 123)
The following person is commissioned for the collection of the technical documents:
Reinhold Bauer
by proxy Reinhold Bauer (Construction manager)
Documentation represenative
Ichenhausen, 09.01.2018
16
DGB