english 15
Trouble shooting
Problem Possible Cause Help
Motor doesn’t start a) No electricity
b) Defective switch, condenser
c) Defective extension cord
a) Check fuse
b) Have an electrician inspect unit
c) Unplug cord, inspect and replace, if
necessary
Work piece atters
while working
a) Working piece becomes loose while
working
b) Work piece is not properly centered
c) Rotational speed is too high
a) Follow the instructions in the operating
manual
b) Follow the instructions in the operating
manual
c) Select a lower rotational speed
Tool rest or tailstock
cannot be clamped
Setting the eccentric clamping Return the hexagonal nut at the bottom
side about ½ rotation with the socket span-
ner
To Next Page
Loading...
