www.scheppach.com
24
|
GB
15. Troubleshooting
The following table shows fault symptoms and describes remedial measures in the event of your machine failing to
work properly. If you cannot localise and rectify the problem with this, please contact your service workshop.
Fault Possible cause Remedy
Motor does not start.
Mains cable or fuse faulty. Check mains cable and fuse.
Motor or switch faulty. Contact an electrician.
Air ow too weak.
External lter blocked. Blow out or replace lter.
Inner lter blocked. Blow out or replace lter.
To Next Page
Loading...
