www.scheppach.com
24
|
GB
Explanation of the symbols on the device
Symbols are used in this manual to draw your attention to potential hazards. The safety symbols and the accompa-
nying explanations must be fully understood. The warnings themselves will not rectify a hazard and cannot replace
proper accident prevention measures.
Before commissioning, read and observe the operating manual and safety instruc-
tions!
Wear hearing protection.
If dust builds up, wear respiratory protection!
Wear protective goggles.
Attention! Danger of injury! Do not reach into saw blade while it is running!
Attention! Laser beam
Protection class II (double insulation)
m Attention!
We have marked points in these operating instructions that impact your safety with this
symbol.
To Next Page
Loading...
