To Next PageTo Next PageWhy does my Scheppach Saw motor overheat easily?
Your Scheppach Saw motor may overheat due to overloading or insufficient cooling. To resolve this, avoid overloading the motor while cutting. Also, remove dust from the motor to ensure optimal cooling.
What to do if Scheppach HM120L Saw motor does not reach its full power?
If the motor of your Scheppach Saw doesn't reach its full power, it might be because the circuits in the network are overloaded by other equipment. Avoid using other equipment or motors on the same circuit.
What to do if my Scheppach HM120L Saw cut is rough or wavy?
If the saw cut of your Scheppach Saw is rough or wavy, it could be due to a dull saw blade or a tooth shape that's not appropriate for the material thickness. Try resharpening the saw blade or using a more suitable one.
Why does my Scheppach HM120L Saw motor make excessive noise?
If the motor of your Scheppach Saw is making excessive noise, it could be due to damaged coils or a defective motor. Arrange for a specialist to inspect the motor.
What to do if Scheppach Saw motor does not work?
If the motor of your Scheppach Saw does not work, the motor, cable, or plug might be defective, or the fuses may have blown. Check the fuses and replace them if necessary. Arrange for a specialist to inspect the machine.
Why Scheppach HM120L motor starts up slowly?
If your Scheppach Saw motor starts up slowly and does not reach operating speed, the voltage may be too low, the coils may be damaged, or the capacitor may be burnt. Contact the utility provider to check the voltage and arrange for a specialist to inspect the motor and replace the capacitor.
How to troubleshoot a Scheppach HM120L Saw when the motor does not work?
If the Scheppach Saw motor isn't working, the issue might stem from a defective motor, cable, or plug, or even burnt fuses. It's crucial to have a specialist inspect the machine. Never attempt to repair the motor yourself due to the danger involved! Also, check the fuses and replace them if needed.
Why is the saw cut rough or wavy on my Scheppach Saw?
If the saw cut on your Scheppach Saw is rough or wavy, the saw blade might be dull, or the tooth shape isn't appropriate for the material thickness. Try to resharpen the saw blade and/or use a suitable saw blade.
What to do if my Scheppach HM120L Saw motor starts slowly and doesn't reach operating speed?
If the Scheppach Saw motor starts up slowly and doesn't reach operating speed, the voltage might be too low, the coils could be damaged, or the capacitor might be burnt. Contact the utility provider to check the voltage. Arrange for inspection of the motor by a specialist. Arrange for replacement of the capacitor by a specialist.
Why does the workpiece pull away and/or splinter when using my Scheppach Saw?
If the workpiece pulls away and/or splinters when using your Scheppach Saw, it could be due to excessive cutting pressure or an unsuitable saw blade. Insert a suitable saw blade to fix this issue.
Covers scope, exclusions, period, claims procedure, service contact, and wear parts.
Explains symbols for instructions, PPE, saw blade hazards, and laser radiation.
Defines intended use, prohibits misuse, and lists potential hazards.
Basic safety measures for electric tools, covering work area, environment, and personal protection.
Guidance on safe sawing, electromagnetic field warnings, and saw blade handling.
Detailed procedure for safely changing the saw blade, including PPE and alignment checks.
A guide to identify common faults, their causes, and recommended solutions for troubleshooting.
General
