Scheppach HM305SL User Manual

www.scheppach.com
38
|
GB
15. Troubleshooting
Fault Possible cause Remedy
Motor does not work Engine, cable or connector defective,
mains fuses blown.
Arrange for inspection of the machine
by a specialist.
Never repair the motor yourself.
Danger!
Check mains fuses and replace as
necessary
The engine runs slowly and
does not reach the operating
speed.
Voltage too low, coils damaged, capacitor
burnt.
Have an electrician check the voltage.
Arrange for inspection of the motor by
a specialist. Arrange for replacement
of the capacitor by a specialist.
Engine producing excessive
noise.
Coils damaged, motor defective. Arrange for inspection of the motor by
a specialist.
The engine does not reach full
power.
Circuits in the network are overloaded
(lamps, other motors, etc.).
Do not use any other equipment or
engines on the same circuit.
Motor overheats easily. Overloading of the motor, insu󰀩cient
cooling of the motor.
Avoid overloading the motor while
cutting, remove dust from the motor
in order to ensure optimal cooling of
the motor.
Saw cut is rough or wavy. Saw blade dull, tooth shape not
appropriate for the material thickness.
Resharpen saw blade and/or use
suitable saw blade.
Workpiece pulls away and/or
splinters.
Excessive cutting pressure and/or saw
blade not suitable for use.
Insert suitable saw blade.
• The symbol of the crossed-out dustbin means that
waste electrical and electronic equipment must not
be disposed of with household waste.
• Waste electrical and electronic equipment can be
handed in free of charge at the following places:
- Public disposal or collection points (e.g. municipal
works yards)
- Points of sale of electrical appliances (stationary
and online), provided that dealers are obliged to
take them back or o󰀨er to do so voluntarily.
- Up to three waste electrical devices per type of
device, with an edge length of no more than 25
centimetres, can be returned free of charge to
the manufacturer without prior purchase of a new
device from the manufacturer or taken to another
authorised collection point in your vicinity.
- Further supplementary take-back conditions of
the manufacturers and distributors can be ob-
tained from the respective customer service.
• If the manufacturer delivers a new electrical appli-
ance to a private household, the manufacturer can
arrange for the free collection of the old electrical
appliance upon request from the end user. Please
contact the manufacturer’s customer service for
this.
• These statements only apply to devices installed
and sold in the countries of the European Union
and which are subject to the European Directive
2012/19/EU. In countries outside the European Un-
ion, di󰀨erent regulations may apply to the disposal of
waste electrical and electronic equipment.

Scheppach HM305SL Specifications

General

Brand	Scheppach
Model	HM305SL
Category	Saw
Language	English