To Next PageTo Next PageWhat to do if Scheppach MR196- 61 Lawn Mower is loud and vibrates heavily?
If your Scheppach Lawn Mower is running loudly and vibrating heavily, try these solutions: check the screws and blade fasteners, replace the blade and V-belt, and clean the discharge chute.
What to do if Scheppach Lawn Mower has poor cut and lawn turns yellow?
If your Scheppach Lawn Mower is providing a poor cut and the lawn turns yellow after mowing, sharpen the blade and set the correct cutting height.
What to do if Scheppach MR196- 61 Lawn Mower motor output drops during mowing?
If the motor output drops during mowing with your Scheppach Lawn Mower, reduce the driving speed and increase the cutting height.
What to do if Scheppach MR196- 61 does not drive?
If your Scheppach Lawn Mower does not drive, engage the gearbox (freewheel lever), fit the V-belt (gearbox), replace the V-belt (gearbox) and install the feather key.
How to fix unclean grass clippings discharge on Scheppach Lawn Mower?
To resolve unclean grass clippings discharge with your Scheppach Lawn Mower: set the correct height, replace the blade, empty the basket, clean the ejector chute, mow during dry weather, and choose a lower gear.
What to do if Scheppach MR196- 61 Lawn Mower does not start with electrical start?
If your Scheppach Lawn Mower doesn't start with the electrical start, charge the battery or replace the fuse.
What to do if the grass clippings discharge is unclean on my Scheppach Lawn Mower?
Unclean discharge of grass clippings from your Scheppach Lawn Mower can occur for several reasons. Ensure that the cutting height isn't too low and adjust it accordingly. Replace the blade if it's worn. Empty the basket if it's clogged. Clean the ejector chute if it's blocked. Avoid mowing when the grass is too wet, and choose a lower gear if the driving speed is too high.
Why is my Scheppach Lawn Mower engine overheating?
If your Scheppach Lawn Mower engine is overheating, it could be due to dirty cooling ribs, which you should clean. Also, check the engine oil level and top it up if necessary. A worn V-belt can also cause overheating, so replace it if needed.
General| Drive | Self-propelled |
|---|---|
| Cutting Height Range | 25-75 mm |
| Engine Type | Petrol |
| Cutting Height Adjustment | Central |
| Grass Collection | Yes |
