www.scheppach.com
GB
|
21
2. Device description (Fig. 1)
1. Recoil starter
2.
3.
4. Handle
5.
6. Handlebar mount
7.
8. Fuel pipe
9. Blade guard
10. Depth stop
11. Blades
12.
13. Spring
14. Oil drain plug
15.
16. Accelerator
17. Wheel
18. Fuel drain plug
19.
20.
21.
22.
3. Scope of delivery (Fig. 2 + 3)
•
•
•
•
•
•
•
•
• -
fully.
•
•
• -
port damage. When complaints the dealer must be
not be accepted.
•
•
•
-
•
1. Introduction
Manufaturer:
scheppach
D-89335 Ichenhausen
Dear customer,
and success.
Note:
for damages to the product or damages caused by
•
•
•
• Installation and replacement of non-original spare
•
We recommend:
-
structions before installing and commissioning the
-
-
In addition to the safety regulations in the operating
-
lations that apply for the operation of the machine in
-
Read the instruction manual each time before op-
-
tion. The machine can only be operated by persons
-
In addition to the safety notices contained in this
operating manual and the particular instructions for
-
and the safety information.
To Next Page
Loading...
