www.scheppach.com
GB
|
25
2.
Starting the motor
1. -
2.
A= Full throttle
B= Idle
3.
starts up. If the motor still does not start up after
section in this manual.
4. -
-
9.1 Idle Speed (Fig. 14)
-
machine.
9.2 Shutting Down (Fig. 14 + 15)
9.3 Operating Speed (Fig. 14)
•
•
10. Working instructions
10.1 Depth regulator
-
sure on the handles also helps further control of tilling
-
7. Assembly
1.
2. To enhance the stability of the machine mount the
3.
4. -
ure 7.
5.
6.
8. Function
Throttle Lever (16)
Wheel (17)
distance from the tines. Pull the spring-connected
Depth Regulator Rod (10)
It regulates the tilling depth and helps the operator
control the direction and speed of the tiller.
To adjust the tilling depth (Fig. 5):
1.
2. -
3.
9. Operation
Adding motoroil and gasoline
m ATTENTION! OIL HAS BEEN DRAINED FOR
SHIPPING.
-
1.
To Next Page
Loading...
