Scheppach plana 4.1c

Plana
Art.Nr.
Plana 3.1c
(Art.No.1902207901) 230V/50Hz / (Art. No.1902207902) 400V/50Hz
Plana 4.1c
(Art.No. 1902208901) 230V/50Hz / (Art.No. 1902208902 400V/50Hz
Plana 6.1c
(Art.No. 1902209901) 230V/50Hz / (Art.No. 1902209902) 400V/50Hz
D
Abricht- und Dickenhobel
Original-Anleitung
GB
Jointer and thicknessing planer
Translation from the original instruction manual
FR
Dégau- Rabot
Traduction à partir de la notice originale
FIN
Saumaus- ja tasohöyläkone
Alkuperäisten ohjeiden käännös
1902207850 / 01-2015

Scheppach plana 4.1c Specifications

General

Brand	Scheppach
Model	plana 4.1c
Category	Planer
Language	English

Summary

Jointer and Thicknessing Planer Operation Manual

Technical Data and Specifications

Understanding Symbols and General Notices

Explanation of Symbols

Defines the meaning of various symbols used throughout the manual for clarity and safety.

General Handling and Safety Advice

Provides essential general notices, handling precautions, and product liability information.

Safety Guidelines and Intended Use

Comprehensive Safety Instructions

Details essential safety rules for operation, electrical safety, and hazard prevention.

Intended Use and Residual Risks

Specifies the proper application of the machine and identifies potential hazards that may remain.

Machine Setup and Assembly

Assembly and Installation Steps

Provides step-by-step procedures for assembling and installing the planer.

Commissioning and Operation

Operational Procedures

Details on using the infeed, V-belt, and other operational aspects of the planer.

Electrical Connection and Maintenance

Power Connection and Safety

Routine Maintenance and Cleaning

Planing Knife Management

Troubleshooting and Knife Care

Planing Knife Setting and Sharpening

Problem Resolution Guide

Provides solutions for common operational problems and troubleshooting tips.

Electrical Schematics - Plana 3.1 c

Electrical Schematics - Plana 4.1 c 6.1 c

230 V Circuit Diagram

400 V Circuit Diagram

Warranty and Guarantee Terms