www.scheppach.com / service@scheppach.com / +(49)-08223-4002-99 / +(49)-08223-4002-58
GB
|
19
1. Introduction
Manufacturer:
scheppach
Fabrikation von Holzbearbeitungsmaschinen GmbH
Günzburger Straße 69
D-89335 Ichenhausen
Dear customer,
and success.
Note:
•
•
•
technicians,
•
•
•
-
VDE0113.
We recommend:
-
structions before installing and commissioning the
-
-
life of the machine.
-
-
informed about the associated dangers. The minimum
observed.
arise due to non-observance of these instructions and
2. Layout (Fig. 1)
1. Back handle
2. Trigger
3.
4.
5. Quick acting lock
6.
7. Cutting blade
8. Protective cover for cutting blade
9. Motor
10. Push button for angle adjustment of cutting blade
11. Quick acting lock
12. Mains cable
13. Cable hook
3. Scope of delivery
•
with care.
•
•
• -
at a later date will not be acknow ledged.
•
• -
-
m Important!
ocating!
Fig. 1
• Motor with cutting head
•
• Protector blade
•
•
To Next Page
Loading...
