www.scheppach.com / service@scheppach.com / +(49)-08223-4002-99 / +(49)-08223-4002-58
GB
|
23
Reduce noise generation and vibration to a minimum!
•
•
•
•
•
•
• Wear gloves.
In these operating instructions we have marked
the places that have to do with your safety with
this sign: m
7. Attachment and operation
ATTENTION! Before working on the device - clean-
ASSEMBLY
Assembling the motor casing (Fig. 2)
• -
• -
•
Attaching the shoulder strap (Fig. 3)
•
• -
-
•
•
Never put the shoulder strap over your shoulder
and across your chest, but put it on one shoul-
der. In this way, you will be able to quickly re-
move the tool from your body in case of emer-
gency.
m Warning! -
-
machine without the guard assembled!
Starting and stopping the telescopic hedge trim-
mer (Fig. 4)
•
-
Do not lose this safety information.
Residual risks
•
• Electrical hazards when unsuitable electric con-
nections are used.
•
-
clothing.
• Although having regarded all considerable rules
-
ards.
• -
-
6. Technical data
Cutting data hedge trimmer
Cutting circle diameter mm 18
Bar length mm 450
Cutting length mm 410
min
-1
1540
max. mm
1900-2500
Tilting range 0° - 120°
Power unit
500
Weight kg 3.5
Subject to technical changes!
Information concerning noise emission measured ac-
cording to relevant standards:
WA
PA
Vibration left hand A
hv
2
Vibration right hand A
hv
2
PA
2
To Next Page
Loading...
