To Next PageTo Next PageWhy my Scheppach Trimmer does not start?
If your Scheppach Trimmer doesn't start, several factors could be at play. First, ensure you're following the correct starting procedure. A sooted or damp spark plug can also prevent starting, so clean or replace it. Check that the blade or nylon cutter is correctly assembled. Also, verify there's fuel in the tank. If the carburetor setting is incorrect, contact an authorized customer service outlet.
What to do if my Scheppach BCH3200PB4 starts but does not develop its full power?
If your Scheppach Trimmer starts but lacks full power, check the choke lever setting and adjust as needed. A soiled air filter can also restrict power, so clean it. A blunt cutting blade will reduce efficiency; have it resharpened or replaced. If the carburetor setting is incorrect, it's best to contact an authorized customer service outlet.
How to fix an engine that does not run smoothly in Scheppach Trimmer?
If the engine of your Scheppach Trimmer isn't running smoothly, the spark plug might be the issue. Clean the spark plug and adjust the electrode gap, or replace it with a new one. If the carburetor setting is incorrect, contact an authorized customer service outlet.
Why the temperature of Scheppach BCH3200PB4 is too high?
If your Scheppach Trimmer is overheating, it might be overloaded. Ensure the machine has rest at regular time.
General| Fuel Type | Petrol |
|---|---|
| Engine Type | 2-stroke |
| Line Diameter | 2.5 mm |
| Fuel Tank Capacity | 0.9 L |
| Engine Displacement | 32.6 cm³ |
| Grass Collector Capacity | Not applicable |
| Wheel Diameter | Not applicable |
Information on measured noise emission levels according to relevant standards.
Information on vibration levels for grass trimmer and brush cutter.
Instructions for assembling and disassembling the cutting head for grass trimmer and brush cutter.
Instructions for fitting the drive belt to the machine.
Instructions and safety precautions for fueling the machine.
Guidance on extending cutting line, trimming, mowing, recoil, and jamming.
Covers expert inspection, line spool, cutting blade, spark plug, and air filter maintenance.
Details on checking oil level, changing oil, and lubricating the angle transmission.
Instructions for cleaning the unit and preparing it for storage.
Steps for storing the equipment long-term and putting it back into operation.
Instructions for preparing and transporting the machine.
