ALL SCHERTLER® PRODUCTS ARE COVERED BY A LIMITED TWO-YEAR WARRANTY (FROM THE DATE OF PURCHASE) AGAINST MANUFACTURES
DEFECTS. DETAILS CAN BE OBTAINED FROM YOUR LOCAL DEALER/REPRESENTATIVE. SCHERTLER SA STRONGLY BELIEVES IN “COMMON SENSE”
AND THUS, MISUSE OF OUR PRODUCTS ARE NOT COVERED UNDER RIGHTS OBTAINED THROUGH OUR WARRANTY POLICY OR THAT OF INTERNA-
TIONALLY RECOGNIZED TERMS AND CONDITIONS.
SCHERTLER SA IS CONSTANTLY AIMING TO IMPROVE ITS RANGE OF PRODUCTS THEREFORE, SCHERTLER SA RESERVES THE RIGHT TO AMEND
PRODUCT SPECIFICATIONS WITHOUT NOTICE.
THE SCHERTLER® NAME/LOGO ARE REGISTERED TRADE-NAMES/ TRADEMARKS OF SCHERTLER SA, SWITZERLAND.
All SCHERTLER® PRODUCTS ARE OF PROPRIETARY TECHNOLOGY AND COVERED BY ONE OF MORE WORLDWIDE PATENTS.
7.1. DESCRIPTION
Box two way, bass reflex
7.2. ENCLOSURE SECTION
Construction: Plywood
Weight: 12,2 kg
Dimensions: 32.4 x 29.7 x 38 cm
7.3. AMPLIFIED SPEAKER SECTION
Freq. resp.: 50Hz - 30kHz (-3dB)
Sensivity: 91.9 dB
SPL max: 112.3 dB
7.4. TECHNICAL SPECIFICATIONS INPUTS
MIC channel
Connector: XLR balanced
Sensitivity: -52dB
Impedance: 4.7kohm
LINE channel
Connector: JACK 6.3mm unbalanced
Sensitivity: -47dB
Impedence: 820kohm
Stereo IN
Connector: JACK 3.5mm stereo 4.7Kohm
7.5. TECHNICAL SPECIFICATIONS OUTPUTS
LINE OUT:
Connector: JACK 6.3mm unbalanced
Level: 0dBu
Impedance: 200ohm
DI OUT
Connector: XLR balanced
Level: -15dBu
Impedance: 200ohm
INSERT
Connector: JACK 6.3mm
7.6. INTERNAL EFFECT (digital reverb)
Freq. resp.: 200Hz - 10kHz (-3dB)
Delay time: c.a. 30ms
Reverb time: adjustable to c.a. 3s
7.7. COMPONENTS
Woofer: 8”
Tweeter: Dome 1”
Cross-over: Active, 24dB/octave
Amplifier: 150W + 50W
8ohm
0.001% THD (1000Hz)
7. TECHNICAL DESCRIPTION
To Previous Page
Loading...
