2 Connection
Extension Board for MODBUS on SMARTCON Control Unit
DS-ENGLISH-MODBUS-V2.01-2019.05.15
2.2.1 Design with bin. In- and Outputs
Figure 6: 1. . . shielding connection clamp, 2. . . additional frame, 3. . . metallic cable glands (closed with blind
screw connections at delivery) 4 xM20x1,5, 4. . . terminal strip
2.2.2 Design without bin. In- and Outputs
Figure 7: 1. . . shielding connection clamp, 2. . . terminal strip
An additional frame with 4xM20 holes is possible on special request.
4
To Next Page
Loading...
