Need help?Do you have a question about the SCHIEBEL AB5 and is the answer not in the manual?
General| Brand | SCHIEBEL |
|---|---|
| Model | AB5 |
| Category | Controller |
| Language | English |
Provides a general overview of the actuator and its components, including the SMARTCON control unit and operating unit.
Details the IP protection system (IP66/IP65) for actuators and emphasizes correct cable gland usage.
Covers electromechanical, mechanical, and electrical protection devices integrated into the actuator for safe operation.
Details the steps for mechanically connecting the actuator to fittings or gears, including greasing and cleaning.
Covers the process of electrically connecting the actuator, emphasizing safety precautions and proper wiring.
General guidelines for commissioning, including mechanical pre-adjustment, position indication, and end position adjustments.
Describes how to switch the actuator to manual operation using the hand lever and wheel, and safety considerations.
Details the mechanical pre-adjustment steps for actuators with a design potentiometer for travel, including setting values.
Explains how to adjust the mechanical position indication in conjunction with the mechanical pre-setup.
Guides on parameterizing the SMARTCON control unit after the actuator pre-setup, emphasizing torque and end position settings.
Details the process of setting the end positions (OPEN and CLOSE) for actuators using a potentiometer for travel.
Provides instructions for setting end positions for actuators using a switch for travel, including adjustments for roller-type counters.
Explains how to replace the button cell battery for the real-time clock and counter readings, emphasizing safety.
Details the location and types of fuses used in the SMARTCON control unit and their specifications.
To Next Page
