SCHIEBEL AB5 - Power Supply Requirements

Operating Instructions for Actuators Type AB with Control Unit
OM-ENGLISH-ABCSC.V1.2-16xx-V2.02-2023.04.27 15 Technical data
15.9 Power supply
The internal supply of the SMARTCON control unit is made via the power connection. At 3-phase current a
neutral phase is not required. The following table shows the possible different voltage ranges of the control.
voltage (3-phase, standard range): . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 x 380, 400, 415, 440 VAC +/-10%
voltage (3-phase, on request): . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 x 110, 115, 120 VAC +/-10%
voltage (3-phase, on request): . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 x 220, 230, 240 VAC +/-10%
voltage (3-phase, on request): . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 x 460, 480, 500, 525 VAC +/-10%
voltage (3-phase, on request): . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 x 575, 660, 690 VAC +/-10%
voltage (single-phase, on request): . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 110, 115, 120 VAC +/-10%
voltage (single-phase, on request): . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 220, 230, 240 VAC +/-10%
frequency: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50/60Hz, +/-3Hz
idle power consumption: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .max. 24W
NOTE: For the supply voltage of the complete system (control unit and actuator) also the motor voltage must
still be considered (see actuator data and name plate)!
15.10 Connections
Size 1 (mechanical reversing starter mW4, mW5, mW7K and electronical reversing starter):
Power / motor: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . till 440V: Industrial plug with 6 pins, screw connection
16A, max. 2,5mm
2
, AWG14
from 460V: Industrial plug with 3+2 pins, screw connection
16A, max. 2,5mm
2
, AWG14
Control signals: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Industrial plug with 24 pins, screw connection
16A, max. 2,5mm
2
, AWG14
optional crimp contacts are available
Size 2 (mechanic reversing starters mW7, mW11 and mW22):
Power / motor: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Industrial plug with 4 pins, screw connection
80A, 1,5. . . 16mm
2
Control signals: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Industrial plug with 24 pins, screw connection
16A, max. 2,5mm
2
, AWG14
optional crimp contacts for the control unit are available
Explosion-proof version:
Power / motor: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . terminals with screw connection
16A, 0,5. . . 4mm
2
, AWG20. . . AWG12
Control signals: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . terminals with screw connection
4A, 0,5. . . 2,5mm
2
, AWG20. . . AWG14
15.11 Miscellaneous
Ambient temperature:
On/Off Actuators: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -25 to +70°C
Modulating actuators: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -25 to +60°C
explosion-proof version: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -20 to +40°C (acc. EN60079-0)
protection class:
standard actuators, size 1 1: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . IP67
standard actuators, size 2: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . IP65
explosion-proof version: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . IP65
colour: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . RAL7030 (other colors on request)
39