EasyManua.ls Logo

Schiller BOB-CAT 912520A User Manual

Default Icon
80 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
MAN 4176928
Rev. B 09-2019
912480A
BC QUICKCAT 4000 FX651V KAW 48" SD
(S/N 1576 and higher)
912520A
BC QUICKCAT 4000 FX691V KAW 52" SD
(S/N 2218 and higher)
912610A
BC QUICKCAT 4000 FX730V KAW 61" SD
(S/N 1018 and higher)
912521A
BC QUICKCAT 4000 FT730V KAW EFI 52" SD
(S/N 0000 and higher)
912611A
BC QUICKCAT 4000 FT730V KAW 61" SD
(S/N 0000 and higher)
912480AAU
BC QUICKCAT 4000 FX651V KAW 48" SD
(S/N 90103 and higher)
912520AAU
BC QUICKCAT 4000 FX691V KAW 52" SD
(S/N 90100 and higher)
912610AAU
BC QUICKCAT 4000 FX730V KAW 61" SD
(S/N 90100 and higher)
www.bobcatturf.com
OPERATOR’S / PARTS MANUAL

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the Schiller BOB-CAT 912520A and is the answer not in the manual?

Schiller BOB-CAT 912520A Specifications

General IconGeneral
BrandSchiller
ModelBOB-CAT 912520A
CategoryLawn Mower
LanguageEnglish

Summary

SAFETY

General Safety Notices and Signal Words

Explains hazard levels (Danger, Warning, Caution) and general safety notices.

Operator Preparation and Safe Operation

Details requirements for safe operation, operator qualifications, and clothing.

Operating and Stopping Procedures

Covers safe engine operation, starting, operation, and stopping rules.

Children, Slope Mowing, and Towing Safety

Emphasizes child safety and provides guidance for mowing on slopes and towing.

Blade, Battery, and Storage Safety

Details safety for blades, batteries, jump-starting, and storage.

ASSEMBLY AND SETUP

Tools Required and Unit Uncrating

Lists necessary tools and instructions for uncrating the unit.

Final Preparations and Battery Installation

Covers fluid checks, tire pressure, and safe battery installation.

CONTROLS

Non-EFI and EFI Unit Control Layouts

Details keyswitch, throttle, PTO switch, choke, and hour meter functions.

Control Levers and Indicator Lights

Describes control levers, operator presence, and indicator lights.

Parking Brake and Machine Push Operation

Explains parking brake adjustment and enabling manual machine movement.

PRE-OPERATION CHECK LIST

Owner's Pre-Operation Checklist

Lists essential pre-operation checks and responsibilities for the owner.

OPERATION

Fueling and Engine Starting Procedures

Covers safe fueling and pre-start engine checks, including interlocks.

Driving, Steering, and Stopping

Details how to drive, steer, perform turns, and safely stop the machine.

Cutting Procedures and Tips

Covers starting cutting, throttle use, and provides tips for efficient mowing.

MAINTENANCE CHART

Engine Maintenance Schedule

Details routine maintenance operations for the engine based on hours of use.

MAINTENANCE

MAINTENANCE / STORAGE

ADJUSTMENTS

Deck Leveling and Height of Cut Adjustment

Procedures for adjusting deck leveling and setting the desired height of cut.

SPECIFICATIONS

Cutterdeck Specifications

Specifications for different cutterdeck sizes, including width, blade length, and tip speed.

Related product manuals