Need help?Do you have a question about the Schiller BOB-CAT QUICKCAT 912480 and is the answer not in the manual?
General| Brand | Schiller |
|---|---|
| Model | BOB-CAT QUICKCAT 912480 |
| Category | Lawn Mower |
| Language | English |
Warnings about modifications and definitions of hazard signals.
Ensuring operators are trained and the site is prepared for mowing.
Checks, starting procedures, and safe operation.
Safe maneuvering techniques and general safety precautions.
Safely stopping operations and critical guidelines for mowing slopes.
Safety practices for maintenance and handling blades.
Safe practices for refueling and fuel storage.
Safety measures for batteries, storage, and jump starting.
Labels concerning injury prevention and warnings.
Labels related to machine operation and fuel handling.
Labels for blade safety, maintenance, and fire hazards.
Operation of key controls like ignition, throttle, PTO, and levers.
How to use the fuel selector and parking brake.
Procedures for manually moving the machine.
Essential checks before operation and safety on slopes.
Procedures for fueling, starting, driving, and safety interlocks.
How to steer, turn, and safely stop the machine.
Steps for cutting and advice for optimal mowing.
Table outlining maintenance tasks and intervals.
Section for logging completed maintenance.
Daily checks including interlocks, hardware, tires, and battery.
Lubrication points and information on blade spindle bearings.
Procedures for transaxle fluid change and air cleaner maintenance.
Importance of cooling system and cleaning tasks.
Procedures for engine oil, spark plugs, and fuel filter maintenance.
Steps to remove air from the hydrostatic transaxle system.
Procedures for blade maintenance including removal, installation, and balancing.
Torque values for components and cleaning procedures.
Adjustments for belts, deck leveling, and cutting height.
Adjustments for the front deck lip and deck rollers.
Checking and adjusting the parking brake linkage.
Adjusting the neutral position of the hydrostat.
Steps for replacing cutterdeck and transaxle drive belts.
To Next Page