To Next PageTo Next Page
Need help?Do you have a question about the Schiller BOB-CAT BC PROCAT 6000 FX801 W/61 SIDE DISCHARGE TA and is the answer not in the manual?
General| Category | Lawn Mower |
|---|---|
| Discharge Type | Side Discharge |
| Cutting Width | 61 inches |
| Model Number | BOB-CAT BC PROCAT 6000 |
| Engine Type | Kawasaki FX801V |
Guidelines for safe fueling to prevent fires, explosions, and health hazards.
Warnings about hot engine parts, exhaust fumes, starting procedures, and operator responsibilities.
Precautions to prevent children from accessing or being injured by the machine.
Precautions for operating on slopes, including terrain, traction, and turns.
Information on the importance and proper use of the ROPS for operator safety.
Guidelines for safely loading and transporting the machine on a trailer or truck.
Precautions and recommendations for safely towing other equipment.
Warnings and precautions related to hydraulic fluid and system maintenance.
Precautions for safely handling and working with mower blades.
Warnings and safety guidelines for working with the machine's battery.
Instructions for operating the deck lift, transport latch, and height of cut pin.
Explanation of how traction levers control movement, steering, and braking.
List of checks the owner must perform before operating the machine.
Steps for fueling and performing pre-start checks before engine ignition.
Explanation of safety interlocks that prevent operation under unsafe conditions.
Procedure for safely starting the engine, including choke usage.
Tips for efficient operation and detailed instructions for driving the machine.
Step-by-step guide on how to safely stop the machine and park it.
How to make turns safely to prevent turf damage and maintain control.
Critical warnings and advice on preventing machine rollovers.
Steps for engaging the blades and setting the throttle for cutting.
Chart detailing required engine maintenance based on operating hours.
Schedule for transaxle and general machine maintenance tasks.
Procedures to verify the daily operation of safety interlock systems.
Safety and procedural guidelines for servicing AGM type batteries.
Locations and intervals for greasing deck lift components and pivots.
Procedures for changing engine oil and performing daily oil level checks.
Importance of keeping cooling systems clear to prevent overheating and damage.
Steps for changing the transaxle oil, including filter replacement.
Detailed steps for leveling the mower deck using blocks and adjusting screws.
Steps to adjust tracking so the machine drives straight.
Procedure to ensure traction control levers are properly centered in neutral lock.
Procedure to reset the neutral position on the hydrostat if necessary.
Step-by-step guide for removing and installing the cutterdeck belt.
Instructions for removing and installing the traction drive belt.
