EasyManua.ls Logo

Schiller BOB-CAT QUICKCAT 4000 User Manual

Default Icon
80 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
MAN 4176928
Rev. B 09-2019
912480A
BC QUICKCAT 4000 FX651V KAW 48" SD
(S/N 1576 and higher)
912520A
BC QUICKCAT 4000 FX691V KAW 52" SD
(S/N 2218 and higher)
912610A
BC QUICKCAT 4000 FX730V KAW 61" SD
(S/N 1018 and higher)
912521A
BC QUICKCAT 4000 FT730V KAW EFI 52" SD
(S/N 0000 and higher)
912611A
BC QUICKCAT 4000 FT730V KAW 61" SD
(S/N 0000 and higher)
912480AAU
BC QUICKCAT 4000 FX651V KAW 48" SD
(S/N 90103 and higher)
912520AAU
BC QUICKCAT 4000 FX691V KAW 52" SD
(S/N 90100 and higher)
912610AAU
BC QUICKCAT 4000 FX730V KAW 61" SD
(S/N 90100 and higher)
www.bobcatturf.com
OPERATOR’S / PARTS MANUAL

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the Schiller BOB-CAT QUICKCAT 4000 and is the answer not in the manual?

Schiller BOB-CAT QUICKCAT 4000 Specifications

General IconGeneral
CategoryLawn Mower
ModelBOB-CAT QUICKCAT 4000
Power SourceGasoline
ManufacturerSchiller
Grass Collection Bag CapacityNot applicable
Cable LengthNot applicable

Summary

Safety

Signal Word Definitions

Defines DANGER, WARNING, CAUTION and their meanings.

Preparing for Safe Operation

Covers operator preparation, training, clothing, and general safety practices.

Operating Safely

Provides instructions for starting, operating, and stopping the machine safely.

Children and Mowing Slopes

Safety precautions regarding children and operating on slopes.

Assembly and Setup

Labels

Controls

Keyswitch, Throttle, and PTO Switch

Explains the function of the keyswitch, throttle, and PTO switch.

Control Levers and Height of Cut

Describes control levers, HOC handle, and HOC pin functions.

Pre-Operation Check List

Owner's Responsibility

Outlines the owner's responsibilities for pre-operation checks.

Operation

Fueling, Engine Start, and Driving

Procedures for fueling, starting the engine, and driving the machine.

Steering and Stopping

Instructions for steering, turning, and safely stopping the machine.

Maintenance Chart

Engine, Transaxle, and Machine Maintenance Intervals

Specifies maintenance intervals for engine, transaxle, and machine components.

Maintenance Record

Maintenance

Daily Checks and Battery Safety

Covers daily maintenance tasks and safety interlock system checks.

Battery Safety

Safety precautions for handling and servicing the AGM type battery.

Maintenance / Storage

Adjustments

Belts, Deck Leveling, and Height of Cut

Adjustments for belts, deck leveling, and setting the height of cut.

Belt Replacement

Cutterdeck and Transaxle Drive Belt Replacement

Step-by-step instructions for replacing cutterdeck and transaxle drive belts.

Specifications

Power Units Overview

Details engine, drive system, controls, weight, fuel, speed, and tire specifications.

Controls

Related product manuals