EasyManua.ls Logo

Schiller BOB-CAT CRZ FR651V KAW W/48 SIDE DISCHARGE User Manual

Default Icon
68 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
PARTS / OPERATOR’S MANUAL
MAN 4172930
Rev. A. 11-2015
MOWERS
®
942604
BOBCAT CRZ FR651V KAW W/48 SIDE DISCHARGE
(S/N 0000 thru 1348)
942605
BOBCAT CRZ FR651V KAW W/52 SIDE DISCHARGE
(S/N 0000 thru 1157)
942606
BOBCAT CRZ FR691V KAW W/61 SIDE DISCHARGE
(S/N 0000 thru 0418)
942607
BOBCAT CRZ FR651V KAW W/42 SIDE DISCHARGE
(S/N 0000 thru 0126)
Question and Answer IconNeed help?

Do you have a question about the Schiller BOB-CAT CRZ FR651V KAW W/48 SIDE DISCHARGE and is the answer not in the manual?

Schiller BOB-CAT CRZ FR651V KAW W/48 SIDE DISCHARGE Specifications

General IconGeneral
BrandSchiller
ModelBOB-CAT CRZ FR651V KAW W/48 SIDE DISCHARGE
CategoryLawn Mower
LanguageEnglish

Summary

Safety Information and Procedures

Signal Word Definitions

Explains hazard level signal words used in the manual.

Machine Preparation and Operation Safety

Details pre-operation checks, safe operation, and maneuvering.

Slope Mowing and Maintenance Safety

Precautions for mowing slopes and safety during maintenance.

Blade, Fuel, and Battery Safety

Safety warnings for blades, fuel, battery use, and storage.

Jump Starting Safety

Instructions for safely jump-starting the machine.

Set Up Instructions

Uncrating and Initial Assembly

Steps for uncrating the unit and tightening bolts.

Tire Pressure and Traction Lever Adjustment

Setting tire pressure and adjusting traction levers.

Final Preparations

Checks and procedures before first use, including battery.

Labels and Decals

Controls Overview and Operation

Key Controls Overview

Operation of ignition, throttle, choke, PTO, and hour meter.

Deck and Transport Controls

Operation of foot pedal, latch, and height of cut pin.

Traction Levers, Steering, and Parking Brake

Operation of drive, steering, and parking brake controls.

Pushing the Machine

Procedure for manually moving the machine.

Pre-Operation Check List

Operating Procedures

Fueling and Engine Start Procedures

Steps for fueling, starting, and interlock system.

Driving and Cutting Operations

Guidelines for operating the machine and cutting grass.

Maintenance Chart

Maintenance Record

Maintenance Procedures

Daily Checks and Tire Pressure

Essential pre-operation checks for daily use.

Battery Maintenance Procedures

Servicing and charging the AGM battery.

Engine Oil and Filter Service

Procedures for checking and changing engine oil and filter.

Spark Plug and Fuel Filter Service

Inspection of spark plugs and fuel filter.

Air Cleaner and Engine Cooling

Cleaning air cleaner and ensuring engine cooling.

Torque Values and Transaxle Purging

Specific torque specs and hydrostatic system purging.

Transaxle Fluid Change and Maintenance

Procedure for changing transaxle fluid and system overview.

Blade Service Procedures

Steps for blade removal, installation, balancing, and sharpening.

Adjustments

Deck Leveling and Height Adjustment

Procedures for adjusting deck height and level.

Deck Roller Adjustment

Adjusting deck rollers for flotation and scalping.

Parking Brake Linkage Adjustment

Procedure to adjust the parking brake for proper function.

Hydrostatic Transaxle Neutral Adjustment

Procedure to adjust the neutral setting of the hydrostat.

Belt Replacement Procedures

Cutterdeck Belt Replacement and Tensioning

Steps to replace cutterdeck belt and adjust tension.

Hydro Transaxle Drive Belt Replacement

Procedure for replacing the transaxle drive belt.

Seat Adjustment

How to adjust the operator's seat position.

Parts Section

Frame-Engine/Clutch Assembly

Transaxle Assembly

Fuel Tank/Bumper & Control Panel

Fuel Valve & Cover Plate

Deck Lift Assembly

Caster Assembly

Kickplate/Seat Assembly

Steering System

Parking Brake System

Wire Harness Diagram

42" Side Discharge Deck

48" Side Discharge Deck

52" Side Discharge Deck

61" Side Discharge Deck

Decals - Power Unit

Related product manuals