Schiller BOB-CAT CRZ FR691V KAW W/61 SIDE DISCHARGE User Manual

PARTS / OPERATOR’S MANUAL
MAN 4172930 Rev. A. 11-2015
MOWERS
®
942604
BOBCAT CRZ FR651V KAW W/48 SIDE DISCHARGE
(S/N 0000 thru 1348)
942605
BOBCAT CRZ FR651V KAW W/52 SIDE DISCHARGE
(S/N 0000 thru 1157)
942606
BOBCAT CRZ FR691V KAW W/61 SIDE DISCHARGE
(S/N 0000 thru 0418)
942607
BOBCAT CRZ FR651V KAW W/42 SIDE DISCHARGE
(S/N 0000 thru 0126)

Schiller BOB-CAT CRZ FR691V KAW W/61 SIDE DISCHARGE Specifications

General

Brand	Schiller
Model	BOB-CAT CRZ FR691V KAW W/61 SIDE DISCHARGE
Category	Lawn Mower
Language	English

Summary

SAFETY

Preparing for Safe Operation

Guidance on operator readiness and site preparation for safe use.

Machine Preparation and Safe Operation

Ensuring the machine is ready and general safe operating practices.

Starting and Maneuvering Safely

Procedures for starting the engine and safe machine handling.

Interrupting Operation and Mowing Slopes

SET UP INSTRUCTIONS

Uncrating and Tire Pressure

Final Preparations and Battery Connection

MACHINE CONTROLS OVERVIEW

Key Switch, Throttle, and Choke Controls

Power Take Off (PTO) Switch Operation

Deck Lift and Transport Controls

Height of Cut Adjustment

Traction Levers and Driving

How to operate traction levers for movement and steering.

Steering Mechanism

Parking Brake Engagement

PRE-OPERATION CHECK LIST

OPERATION GUIDELINES

Fueling and Engine Starting Procedures

Procedures for refueling, preparing the engine, and starting it safely.

Operating Notes and Driving Techniques

Steering and Turning Techniques

Cutting Procedures and Tips

Instructions for effective mowing and advice for optimal cutting results.

MAINTENANCE CHART

REGULAR MAINTENANCE PROCEDURES

Daily Checks and Battery Care

Engine Oil and Filter Service

Procedures for servicing engine oil and the oil filter.

Spark Plugs and Fuel Filter Maintenance

Air Cleaner Service

Engine Cooling and Specific Torques

Transaxle Purging Procedure

Transaxle Fluid Change and Maintenance

How to change the transaxle fluid and essential maintenance for this component.

Blade Service and Installation

Procedures for removing, sharpening, balancing, and installing mower blades.

MACHINE ADJUSTMENTS

Deck Leveling and Height of Cut

Adjusting the deck for optimal cutting performance and desired height.

Parking Brake Linkage Adjustment

Hydrostatic Transaxle Neutral Adjustment

Procedure to ensure the hydrostatic drive is properly centered in neutral.

BELT REPLACEMENT PROCEDURES

Cutterdeck Belt Replacement

Step-by-step guide for replacing the mower deck belt.

Belt Tension Adjustment

Transaxle Drive Belt and Seat Adjustment

42" SIDE DISCHARGE DECK (FIGURE 11)

48" SIDE DISCHARGE DECK (FIGURE 12)

52" SIDE DISCHARGE DECK (FIGURE 13)

61" SIDE DISCHARGE DECK (FIGURE 14)