schmersal AZM 161 Series

To Next Page

AZM 161../..

Operating instructions

Solenoid interlock

1. About this document

1.1 Function

This operating instructions manual provides all the information you

need for the mounting, set-up and commissioning to ensure the safe

operation and disassembly of the safety switchgear. The operating inst-

ructions must be available in a legible condition and a complete version

in the vicinity of the device.

1.2 Target group: authorised qualified personnel

All operations described in this operating instructions manual must

be carried out by trained specialist personnel, authorised by the plant

operator only.

Please make sure that you have read and understood these operating

instructions and that you know all applicable legislations regarding

occupational safety and accident prevention prior to installation and

putting the component into operation.

The machine builder must carefully select the harmonised standards to

be complied with as well as other technical specifications for the selec-

tion, mounting and integration of the components.

1.3 Explanation of the symbols used

Information, hint, note:

This symbol is used for identifying useful additional information.

Caution: Failure to comply with this warning notice could

lead to failures or malfunctions.

Warning: Failure to comply with this warning notice could

lead to physical injury and/or damage to the machine.

1.4 Appropriate use

The products described in these operating instructions are developed to

execute safety-related functions as part of an entire plant or machine. It

is the responsibility of the manufacturer of a machine or plant to ensure

the correct functionality of the entire machinery or plant.

The safety switchgear must be exclusively used in accordance with the

versions listed below or for the applications authorised by the manufac-

turer. Detailed information regarding the range of applications can be

found in the chapter "Product description".

1.5 General safety instructions

The user must observe the safety instructions in this operating instruc-

tions manual, the country-specific installation standards as well as all

prevailing safety regulations and accident prevention rules.

Further technical information can be found in the Schmersal

catalogues or in the online catalogue on the Internet:

www.schmersal.net.

The information contained in this operating instructions manual is provi-

ded without liability and is subject to technical modifications.

There are no residual risks, provided that the safety instructions as well

as the instructions regarding mounting, commissioning, operation and

maintenance are observed.

1.6 Warning about misuse

In case of inadequate or improper use or manipulations of the

safety switchgear, personal hazards or damages to machi-

nery or plant components cannot be excluded. The relevant

requirements of the standard EN 1088 must be observed.

Content

1 About this document

1.1 Function ..............................................1

1.2 Target group: authorised qualied personnel..................1

1.3 Explanation of the symbols used ...........................1

1.4 Appropriate use ........................................1

1.5 General safety instructions ...............................1

1.6 Warning about misuse ...................................1

1.7 Exclusion of liability .....................................2

2 Product description

2.1 Ordering code .........................................2

2.2 Special versions........................................2

2.3 Destination and use .....................................2

2.4 Technical data .........................................3

2.5 Safety classication .....................................3

3 Mounting

3.1 General mounting instructions .............................3

3.2 Dimensions ...........................................3

4 Electrical connection

4.1 General information for electrical connection..................3

4.2 Contact variants........................................4

5 Set-up and maintenance

5.1 Functional testing.......................................5

5.2 Maintenance ..........................................5

6 Disassembly and disposal

6.1 Disassembly...........................................5

6.2 Disposal ..............................................5

7 Appendix

7.1 EC Declaration of conformity ..............................6

x.000 / März 2013 / v.A. - 103001580-EN / B / 2013-03-22 / AE-Nr. 2425

Operating instructions. . . . . . . . . . . . .pages 1 to 6

Translation of the original operating instructions

Other manuals for schmersal AZM 161 Series

Mounting Instructions2 pages

Need help?

Do you have a question about the schmersal AZM 161 Series and is the answer not in the manual?

Summary

About this document

Appropriate use

General safety instructions

Users must observe safety instructions, country-specific standards, and accident prevention rules.

Warning about misuse

Warns that inadequate use can lead to personal hazards or machine damage, referencing EN 1088.

Product description

Ordering code

Destination and use

Describes the solenoid interlock's purpose: preventing movable safety guards from opening before hazardous conditions are eliminated.

Technical data

Safety classification

Details the safety classification according to EN ISO 13849-1, including B10d and MTTF values.

Mounting

General mounting instructions

Provides instructions for mounting the enclosure, emphasizing double insulation and avoiding use as an end stop.

Electrical connection

General information for electrical connection

Contact variants

Set-up and maintenance

Functional testing

Tests the safety function of components, checking fitting, cable integrity, and enclosure damage.

Maintenance

Disassembly and disposal

Disassembly