Need help?Do you have a question about the schmersal PSC1-C-10-MC and is the answer not in the manual?
Covers intended applications and essential safety guidelines for device operation.
Details sensor circuitry, classification, and diagnostic measures for speed/position sensors.
Explains output circuitry, diagnostics, digital outputs, and I/O classifications.
Covers general installation, module mounting, and backplane bus.
Explains external power supply and sensor connection procedures, including interface assignments.
Explains how to check and document safety functions, parameters, and operators.
Summarizes key safety-related characteristics like PL and system structure.
Covers risk assessment principles and required technical documentation for safety applications.
Outlines the V-model for designing, realising, and testing safety-related applications.
Details safety requirements, functional system specification, software/hardware specs, and verification.
Describes performing system tests (FIT test) and validating software/parameters.
Covers intended applications and essential safety guidelines for device operation.
Details sensor circuitry, classification, and diagnostic measures for speed/position sensors.
Explains output circuitry, diagnostics, digital outputs, and I/O classifications.
Covers general installation, module mounting, and backplane bus.
Explains external power supply and sensor connection procedures, including interface assignments.
Explains how to check and document safety functions, parameters, and operators.
Summarizes key safety-related characteristics like PL and system structure.
Covers risk assessment principles and required technical documentation for safety applications.
Outlines the V-model for designing, realising, and testing safety-related applications.
Details safety requirements, functional system specification, software/hardware specs, and verification.
Describes performing system tests (FIT test) and validating software/parameters.
General| Product name | PSC1-C-10-MC |
|---|---|
| Category | Control Unit |
| Input Voltage | 24 V DC |
| Input circuits | 10 |
| Safety level | SIL 3, PL e |
| Number of safety outputs | 2 |
| Safety category | 4 |
| Protection Class | IP20 |
| Housing material | Plastic |
| Output current | 0.5A per channel |
| Ambient temperature range | -25 ... +60 °C |
To Next Page
