Schnierle SL 3 - Guide and Introduction; Intended Use; Product Specific Data; Introduction;Notes

Instruction manual
Name:
BA-KD-015 – Instruction manual SL3
Revision:
05 – 02.01.2023
Page 3 of 13
© Copyright by Hermann Schnierle GmbH, Dieselstrasse 43, 86368 Gersthofen
1. Guideline and introduction
1.1. Intended use
• The inteded use for your seat-bench combination is sitting while driving for the purpose
of passenger transport. Of course, the seat-bench combination can be used as such
when the vehicle is stationary.
• All use cases varying from the intended use can cause damages and functional errors,
which can affect safe use of your seat-bench-combination.
• Not complying the descriptions contained in this instruction manual may adversely
affect your warranty. Hermann Schnierle GmbH does not accept any warranty or liability
for resulting damage in the event of improper assemly, use and repair.
• Any change to the standard condition (e.g. by retrofitting non-original retrofit and spare
parts from Hermann Schnierle GmbH) may invalidate the tested and approved condition.
Functions may be impaired, endangering your safety.
For this reason any structural modification to the seat-bench combination or the seat is
strictly prohibited unless this has been/will be expressly approved in writing by Hermann
Schnierle GmbH.
Caution

Note: Schnierle seating systems may only be used in combination with the
matching Schnierle leg and floor systems!
1.2. Product specific data
• Please refer to your order and the delivery note for the scope of delivery according to
the variant you have selected and ordered. P. 12
1.3. Introduction/Notes
This instruction manual provides you with all the information you need for safe and efficient
use of your seat-bench combination.
You are obliged to comply with the applicable laws and regulations of the country in which
you are located. These may differ from the information in this instruction manual.
The operating instructions of the vehicle and body manufacturers must also be observed
and are also applicable.
• The latest version of this instruction manual is available from the manufacturer or can
be downloaded directly on our homepage using the QR code provided.
• The operating instructions must be read in full before putting into operation.
• Always keep the instruction manual and the QR code within easy reach in case of need.
• We reserve the right to make changes due to further developments.
1.4. Use of the instruction manual
• In this instruction manual all options and features available for this model are described.
Some descriptions may not apply due to the model variant selected.
• The table of contents at the beginning of the operating instructions will help you to
orientate yourself quickly.
• Directional indications such as left/right or front/rear always refer to the direction of tra-
vel.