Instruction manual
BA-KD-015 – Instruction manual SL3
Page 9 of 13
© Copyright by Hermann Schnierle GmbH, Dieselstrasse 43, 86368 Gersthofen
3.4. Create bench and seat function
1. Push in the head restraints (for details
see also chapter 3.1. P. 6
2. Pull the front part of the seat section up-
wards, the head restraints must be retracted
3. Pull out the seat section to the front
4. Fold the seat section upwards
5. Fold down the seat section
6. Pull the release lever upwards while hold-
ing the retaining lug (see also warning note
danger of crushing) P.10
To Next Page
Loading...