Instruction manual
BA-KD-015 – Instruction manual SL3
Page 7 of 13
© Copyright by Hermann Schnierle GmbH, Dieselstrasse 43, 86368 Gersthofen
The safety belts are designed for only one person at a time.
Child safety systems see 3.3. P. 8
Check all components of the seat belt system for damages and proper function.
Loose or bulky clothing will impair the tight fit of the safety belt. Do not place objects
such as e.g. purses or mobile phones between the seat belt and the body.
Pull the belt webbing out of the retractor, place it untwisted over the body and insert the
buckle tongue into the buckle until it you hear it click into place. Make sure that the belt is
tight against the body while driving.
Warning
Objects and loads must not be secured by the belt system. This can cause injuries by
objects flying around and damage your belt system.
Improper operation and self-performed removal or installation (only permitted by
authorised specialist workshops) can cause loss of function and thus endangering of
the passengers.
Do not run the safety belt over hard or fragile objects in the pockets and clothing.
Putting on the safety belt during pregnancy:
The webbing running over the pelvis must run as low as possible over the pelvis to
avoid pressure on the abdomen.
Caution
Do not place any loads on the belt buckle. This can cause damages and impair
the function.
To release the belt buckle, press the
red button.
To Next Page
Loading...