SCHUBERTH C4 User Manual

52
3. ANATOMY OF THE HELMET
4. OUTER SHELL
The outer shell of the C4 helmet combines an aerodynamically optimal shape
with consistent protection. It consists of a special glass-bre reinforced
duroplastic matrix developed by SCHUBERTH, which gives the helmet the high
level of strength needed for your protection.
Caution:
The safety helmet is designed to absorb the eects of only one impact.
The helmet must be replaced after a fall, accident or any other impact.
5. INNER SHELL
For optimised impact absorption properties, the inner shell of the helmet
consists of several components. The complex multi-segment foam padding of
the main body provides better absorption and dissipation of impact forces and
gives you the highest level of safety. The large side panels ensure the helmet
sits optimally and comfortably.
Face shield
Reective panels
Sun visor
Inner lining
Face shield
ventilation
Chin bar release
Integrated antennas
Head ventilation
Inner shell
Anti-fog lens
Visor mechanicsk
Outer shell
Retention system
(with anti-roll-o
system)
Operating slide for
sun visor
Chinstrap buckle
C. THE HELMET

SCHUBERTH C4 Specifications

General

Shell Material	Fiberglass composite
Safety Standards	ECE 22.05
Pinlock	Included
Helmet Type	Full Face
Visor	Anti-fog, Anti-scratch
Communication System	SC1 communication system
Ventilation	Multi-channel ventilation
Bluetooth	Optional with SC1 system
Neck Roll	Integrated