SCHUBERTH C5 User Manual

EN
25
5. Ensure that the anti-fog lens sits snugly
on the visor. If this is not the case, the
tension on the anti-fog lens can be increased
or decreased, as necessary, by turning the
eccentric holding pin.
Removal
1. Before starting to remove the antifog lens, rst lay the visor on a soft,
clean cloth so that its top edge is facing you.
2. To reduce the pretensioning of the
antifog lens slightly if necessary, use the
balls of your thumbs to carefully bend
the visor suciently apart while applying
pressure with your thumbs to release the
anti-fog lens and move it approx. 2–3
mm forward.
3. Now grip the back of the anti-fog lens
with your index and middle ngers and
lift it o the visor. In this position you
can easily remove the anti-fog lens from
the locking pin with your thumb.
4. You can now remove the anti-fog lens
from the visor.

SCHUBERTH C5 Specifications

General

Helmet Type	Modular
Shell Material	Fiberglass composite
Safety Standard	ECE 22.06
Interior	Removable and washable comfort liner
Sun Visor	Integrated, adjustable
Communication System Ready	Yes
Visor	Anti-fog and scratch-resistant
Sizes	XS to 3XL
Chin Vent	Adjustable
Bluetooth Compatibility	Yes
Weight	Approx. 1640g
Safety Standards	ECE 22.06