EN
89
1. COMMUNICATION SYSTEMS
The CONCEPT is homologated according to UA (Universal Accessory) under
ECE 22.06, allowing you to freely choose a communication system that complies
with a UA homologation from the current ECE 22.06 standards.
To identify the correct position of the universal intercom base, follow the
instruction:
1. Position the commuincation system
using adhesive binding exclusively
in the deisgnated area
2. Install the Speakers into the cavings.
3. Pass the wires through the hole and
position them inside the channels
in the EPS.
H. ACCESSORIES AND SPARE PARTS
To Next Page
Loading...
