76 77
english
3. Take hold of the chinstrap pad and
pull the loop of the neckband out
from around the chinstrap.
4. Now pull the chinstrap backwards
out of the cheek pad.
5. Pull the neckband out through the
neckband channel.
6. Separate the chinstrap pad from
the chinstrap by releasing the
button fixing.
7. Repeat steps 2-5 for the second
cheek pad.
All parts of the inner lining are made from materials that
are gentle on the skin (especially those that come into direct
contact with the head). The material used for the cheek pads is
Coolmax
®
, a soft, breathable material that also conducts heat
and moisture very well, while the headband pad is made from a
special, cooling Thermacool material.
Removing the lining
Note:
When removing the lining, the cheek pads must first be
detached before taking out the headband pad. When fitting
the lining, remember to insert the headband pad before the
cheek pads.
Removing the high-comfort cheek pads
1. Take hold of the sides of the
acoustic collar and pull it out of its
fitting.
2. Release the high-comfort chin
pads by pulling the three red pins
out of their plug fittings.
english
D. THE HELMET
To Next Page
Loading...
Need help?
General
