94 95
personal injury or death. In light stages of misting you may
either open the chin ventilation or the faceshield to the town
position. If the fogging is not immediately reduced stop your
ride.
3. SAFETY ADVICE CONCERNING MODIFICATIONS / ACCESSORIES
Warning:
Do not modify your helmet.
Original parts (especially on the outer shell, inner shell and
retention system) must not be modified or removed. The
fitting of non-genuine, non-recommended parts can partially
or completely counteract the protective function of the helmet
and invalidate the DOT approval with all guarantee and
insurance claims.
Warning:
Use only original parts.
Use only replacement parts and accessories expressly made
for your helmet by SCHUBERTH!
Warning:
Never modify your helmet!
It is very dangerous to drill holes or to cut the shell and/
or the shock absorbing liner. Modification can seriously
weaken the helmet. Modifying the retention system
weakens it, increasing the likelihood of snapping during
impact. Removing parts such as the mouth guard or rubber
face molding can expose edges that may injure you in
an accident. Always use approved SCHUBERTH parts when
replacing shields, screws, or any other parts. A weakened
helmet will not provide head protection.
Warning:
Do not repaint the helmet!
Repainting of your helmet is not recommended. Paint and
thinner can damage the helmet and reduce its ability to
provide head protection in an accident.
Caution:
Do not carry the helmet on the motorcycle’s helmet storage
lock while riding in order to avoid exhaust pipe burns, tire
abrasion, and strap damage to the helmet.
Caution:
Keep the helmet outside the reach of pets to avoid the
helmet being damaged by chewing, scratching or other
mistreatment.
G. FOR YOUR SAFETY
englishenglish
To Next Page
Loading...
