Schulthess WEI 9080 - Additional Rinse; Language; Spin Speed Reduction; Time

52
Basic Settings
The machine has basic settings from the factory. It can
be adapted to the user’s individual needs either when
first used or later using the following functions.
The basic settings can only be changed if no wash pro›
gramme is running. To change a basic setting, it is first
necessary to hold the programme button pressed and
then
press the quick wash button. The corresponding
function
is shown on the digital display. The display
changes when
the quick wash button is pressed repea›
tedly with the programme button held down.
Example:
Function switched off
Function switched on
Additional rinse (ex factory OFF)
+
To improve the rinse results in soft water areas or for
allergy sufferers, switch on the extra rinse.
Water level when washing (ex factory NORMAL )
+
If the function is set to «increased», the water level is
higher during washing.
Water level when rinsing (ex factory NORMAL )
+
If the function is set to «increased», the water level is
higher during rinsing.
Spin speed reduction (
ex factoryOFF)
+
Wash programmes Spin speed in rpm
WEI 9080
Off Level 1 Level 2
reduction reduction
Boil / Coloured wash 1100 1000 600
Easy care wash 800 800 600
Delicate wash 600 600 400
Wool / Hand wash 800 600 400
WEI 9100
Off Level 1 Level 2
reduction reduction
Boil / Coloured wash 1000 1000 600
Easy care wash 800 800 600
Delicate wash 600 600 400
Wool / Hand wash 800 600 400
WEI 9120
Off Level 1 Level 2
reduction reduction
Boil / Coloured wash 800 800 600
Easy care wash 800 800 600
Delicate wash 600 600 400
Wool / Hand wash 800 600 400
WEI 9130
Off Level 1 Level 2
reduction reduction
Boil / Coloured wash 1100 1000 600
Easy care wash 800 800 600
Delicate wash 600 600 400
Wool / Hand wash 800 600 400
WEI 9160
Off Level 1 Level 2
reduction reduction
Boil / Coloured wash 1100 1000 600
Easy care wash 800 800 600
Delicate wash 600 600 400
Wool / Hand wash 800 600 400
Time (the clock is not set ex factory)
+
The hours can be set using thebutton and the
minutes using the button.
Language (ex factory GERMAN )
+
This setting is temporarily valid for the selected
programmeand reverts back to the default language a
few minutes after completion of the programme.
(See «Extended basic settings/Default language»)