Schulthess WEI 9080 - Default Language; Door Opening at Programme End; LCD Contrast; Optical Interface

55
LCD Contrast (ex factory 26)
Select «Extended basic settings»!
The button can be used to alter the contrast on
the display.
Summer noise level (ex factory VOLUME 2)
Select «Extended basic settings»!
With the Alarm setting switched on, a signal sounds at
regular intervals at the end of the programme.
The levelcan be adjusted in 3 levels using the
button.
Off
Noise level 1
Noise level 2
Noise level 3
Standby function (ex factory ON)
Select «Extended basic settings»!
When the standby function is switched on, the controls
switch off when wash programme is running or laundry
weighing is carried out in energy saving mode.
All displays are dark.
Optical interface (ex factory OFF)
Select «Extended basic settings»!
If the optical interface (SCS) is switched on, customer
services can communicate with the machine by PC.
Reduced mains power (ex factory OFF)
Select «Extended basic settings»!
If the mains voltage is reduced, the programme times
will be extended accordingly.
9080/9100/9120
Off= 400 V 3N ~ 9,8 kW / 16 AT
On = 400 V 2N ~ 6,8 kW / 16 AT
Off= 230 V 3 ~ 9,8 kW / 25 AT
9130
Off = 400 V 3N ~ 14.9 kW / 25 AT
On = 400 V 2N ~ 10.0 kW / 25 AT
Off = 230 V 3 ~ 14.9 kW / 40 AT
9160
Off = 400 V 3N ~ 18.0 kW / 32 AT
On = 400 V 2N ~ 12.0 kW / 32 AT
Off = 230 V 3 ~ 18.0 kW / 50 AT
Wash Programme Set (ex factory GASTRONOMIE )
Select «Extended basic settings»!
One of the six programme groups can be selected using
the button.
GASTRONOMY
HOMES
COMM COMPANY
FACILITY CLEANER
WET CLEANING
FIRE BRIGADE
Default language (ex factory GERMAN )
Select «Extended basic settings»!
If another language is temporarily selected via the but›
tons
and , 4 minutes after programme end,
in stand
by mode or after a long standstill, the setting
reverts back to the default language.
Door opening at programme end(ex factory OFF)
Select «Extended basic settings»!
If this function is switched on, the door will open auto›
matically at the end of the programme.
Start time preselect (ex factory24 HOURS)
Select «Extended basic settings»!
The maximum adjustable range of the start time delay
can be reset from 24 hours to 100 hours.