What to do if my Schumacher Electric Battery Charger shows over temperature?
If the Schumacher Electric Battery Charger indicates an over temperature issue, first, unplug the charging gun and reinsert it into your vehicle’s charging port. If the problem persists, unplug the charging gun and allow the unit to cool down before trying to charge again.
What to do if my Schumacher Electric EV Battery Charger has overcurrent?
If the Schumacher Electric Battery Charger is showing an overcurrent issue, unplug the charging gun and then reinsert it into your vehicle’s charging port.
What to do if Schumacher Electric EV Battery Charger has a ground fault?
If the Schumacher Electric Battery Charger displays a ground fault, unplug the charging gun and then reinsert it into your vehicle’s charging port. If the fault continues, it is recommended to consult a licensed electrician to check the ground connection.
What to do if my Schumacher Electric Battery Charger is showing overvoltage?
If the Schumacher Electric Battery Charger indicates an overvoltage issue, unplug the charging gun and then reinsert it into your vehicle’s charging port. If the fault still exists, please consult a licensed electrician to check the AC supply.
What to do if my Schumacher Electric EV Battery Charger is showing undervoltage?
If the Schumacher Electric Battery Charger shows an undervoltage issue, unplug the charging gun and then reinsert it into your vehicle’s charging port. If the fault persists, consult a licensed electrician to check the AC supply.
What to do if my Schumacher Electric EV Battery Charger has leakage?
If your Schumacher Electric Battery Charger is experiencing leakage, for model SEV1600HW, re-power the unit by turning the circuit breaker off and on again. For models SEV1600P1450 and SEV1600P650, unplug the charging station and then plug it back in. If the fault still exists, please consult a licensed electrician for help or contact our support service.
What to do if my Schumacher Electric Battery Charger has a relay fault?
If the Schumacher Electric Battery Charger is showing a relay fault, unplug the charging gun and then reinsert it into your vehicle’s charging port. If the fault still exists, contact our support service.
How to troubleshoot no AC power on my Schumacher Electric EV Battery Charger?
If your Schumacher Electric Battery Charger has no AC power, check the breaker. For models SEV1600P1450 and SEV1600P650, ensure the plug is fully inserted. Have a licensed electrician connect the charging station to AC power.
General| Charging Level | Level 2 |
|---|---|
| Input Voltage | 208-240 VAC |
| Mounting Type | Wall Mount |
| Enclosure Rating | NEMA 4 |
| Cord Length | 25 ft |
| Operating Temperature | -22°F to 122°F (-30°C to 50°C) |
| Output Voltage | 240V |
| Safety Features | Overcurrent Protection, Overvoltage Protection |
Provides essential grounding instructions for safe electrical connection of the product.
Guidance on selecting an appropriate mounting location for the EV wall charger.
Instructions for hardwiring the SEV1600HW model to the power supply.
Steps for connecting the power cord and plug for specific models.
To Next Page