To Next PageTo Next PageWhy will my Schumacher Electric Battery Charger not turn on even when properly connected?
If your Schumacher Electric Battery Charger won't turn on when properly connected, it could be due to a dead AC outlet or a poor electrical connection. Check the AC outlet for an open fuse or circuit breaker. Also, inspect the power cord and any extension cords for loose-fitting plugs.
What to do if the engine start does not work on my Schumacher Electric SC1285 Battery Charger?
If the engine start function on your Schumacher Electric Battery Charger isn't working, there could be several reasons. First, the amount of current drawn may be more than the Engine Start rate, which can reduce crank time to less than 5 seconds. Also, you must wait 3 minutes (180 seconds) between cranks; if the Engine Start LED is blinking, allow the rest time before attempting another crank. The charger may be overheated, so ensure the vents are not blocked and wait for it to cool down. If the battery is severely discharged, use the Boost rate for 10 to 15 minutes before attempting to crank the engine.
General| Input Voltage | 120V AC |
|---|---|
| Output Voltage | 6V/12V |
| Type | Battery Charger |
| Battery Types Supported | Standard, AGM, Gel |
| Safety Features | Reverse Hook-Up Protection |
| Cable Length | 6 ft |
| Display Type | LED |
Covers safe practices for charger use, cord handling, and avoiding damage, fire, or shock.
Highlights the danger of explosive gases near lead-acid batteries and the need to follow instructions.
Advises on protective gear, eye protection, handling acid, avoiding sparks, and removing metal items.
Details on removing battery, ventilation, cleaning terminals, adding water, and checking voltage.
Provides guidance on selecting a safe and suitable location for the battery charger.
Instructions for connecting and disconnecting DC output clips safely to avoid sparks and damage.
Step-by-step guide for connecting the charger to a battery installed within a vehicle.
Step-by-step guide for connecting the charger to a battery removed from a vehicle.
Information on proper grounding, AC cord usage, and extension cord guidelines for safe operation.
Instructions for unpacking, uncoiling cords, and attaching the handle if applicable.
Overview of the control panel, including rate selection, start/stop buttons, and LED indicators.
Detailed steps for charging a vehicle battery, including setup and connection.
Detailed steps for charging a battery removed from a vehicle, including setup and connection.
Chart detailing charging times based on battery application and size.
Explanation of automatic charging, aborted charges, desulfation, and maintain modes.
Instructions and safety precautions for using the engine start function.
Specific notes and states regarding the engine starting sequence.
Details on the charger's auto-start feature and fan operation.
Guidelines for cleaning clamps, cords, case, and proper storage to ensure longevity.
Addresses issues where the charger fails to power on when properly connected.
Troubleshooting steps for when the engine start feature does not work correctly.
Diagnoses problems indicated by the red Clamps Reversed/Bad Battery LED.
