Schumacher Electric SC1410 User Manual

0099002094E-00
PLEASE SAVE THIS OWNERS MANUAL AND READ BEFORE EACH USE. This manual
will explain how to use the battery charger safely and effectively. Please read and follow
these instructions and precautions carefully.
POR FAVOR CONSERVE ESTE MANUAL DEL USUARIO Y LEALO ANTES DE CADA
USO. En este manual le explica cómo utilizar el cargador de batería de manera segura y
conable. Por favor, lea y siga las siguientes instrucciones y precauciones.
GARDER LE MANUEL D’INSTRUCTION ET LISEZ LE AVANT CHAQUE UTILISATION.
Ce manuel explique comment utiliser le chargeur de batterie d’une façon securitaire et
efcace. S’il vous plaît lisez et suivez ces instructions et precautions.
Automatic Battery Charger
Cargador de baterías automático
Chargeur de batterie automatique
92-3
OWNERS MANUAL
MANUAL DEL USUARIO
MANUEL D’UTILISATION

Schumacher Electric SC1410 Specifications

General

Type	Battery Charger
Input Voltage	120V AC
Cable Length	6 feet
Engine Start	No
Microprocessor Controlled	Yes
Multi-Stage Charging	Yes
Reverse Polarity Protection	Yes
Output Voltage	6V/12V DC
Battery Type	AGM, Gel
Features	Float Mode Monitoring

Summary

IMPORTANT SAFETY INSTRUCTIONS

General Safety and Handling

Covers essential safety guidelines for operation, handling, and maintenance to prevent hazards.

Explosive Gas Warning

Highlights the danger of explosive gases from lead-acid batteries and necessary precautions.

PERSONAL SAFETY PRECAUTIONS

Working Near Batteries Safely

Guidance on personal protection, preventing sparks, and handling battery acid.

PREPARING TO CHARGE

Battery Preparation Steps

Instructions for battery removal, terminal cleaning, and fluid level checks.

CHARGER LOCATION

Optimal Placement Guidelines

Recommendations for charger placement to avoid battery gases, acid, and ensure ventilation.

DC CONNECTION PRECAUTIONS

Safe Connection and Disconnection

Steps for connecting and disconnecting DC output clips safely, including polarity.

FOLLOW THESE STEPS WHEN BATTERY IS INSTALLED IN VEHICLE

Vehicle Battery Connection Procedure

Detailed steps for connecting the charger to a battery installed in a vehicle, including polarity.

FOLLOW THESE STEPS WHEN BATTERY IS OUTSIDE VEHICLE

External Battery Connection Procedure

Procedure for connecting the charger to a battery removed from the vehicle.

GROUNDING AND AC POWER CORD CONNECTIONS

Power Cord and Grounding Requirements

Information on proper grounding, AC outlet connection, and extension cord usage.

ASSEMBLY INSTRUCTIONS

Initial Charger Setup

Instructions for unpacking and preparing the charger cables for use.

CONTROL PANEL

LED Indicator Explanations

Description of the meaning of each LED indicator on the charger's control panel.

OPERATING INSTRUCTIONS

Charging a Battery in the Vehicle

Step-by-step guide for charging a battery while it is installed in the vehicle.

Charging a Battery Outside the Vehicle

Detailed instructions for charging a battery that has been removed from the vehicle.

Quick-Connect Cable Usage

Explanation of how to use the quick-connect cable connectors and ring terminals.

Understanding Charging Modes

Details on automatic charging, bad battery detection, desulfation, and maintain mode.

MAINTENANCE AND CARE

Cleaning and Storage Procedures

Guidelines for cleaning clamps, charger case, and proper storage of cords and unit.

REPLACEMENT PARTS

Available Parts List

Lists part numbers for ring connectors and battery clamps.

TROUBLESHOOTING

Common Problems and Solutions

Addresses issues like voltage setting, power LED, and red Bad Battery LED with possible causes and solutions.

BEFORE RETURNING FOR REPAIRS

Contact Information for Support

Provides contact details for troubleshooting assistance and return merchandise authorization.

LIMITED WARRANTY

Warranty Terms and Conditions

Details the two-year limited warranty, exclusions, and purchaser obligations.

WARRANTY CARD

Warranty Registration Information

Instructions for online or mail-in warranty registration and required purchase details.