To Next PageTo Next Page
Need help?Do you have a question about the Schumacher Electric XC10-CA and is the answer not in the manual?
General| Brand | Schumacher Electric |
|---|---|
| Model | XC10-CA |
| Category | Battery Charger |
| Language | English |
Batteries generate explosive gases during normal operation. Follow instructions to prevent explosion.
Product contains chemicals known to cause cancer and birth defects. Wash hands after handling.
Wear protective clothing, have safety supplies, and remove metal jewelry when working with batteries.
Remove cord wraps and uncoil cables before using the battery charger.
Connect to a properly installed and grounded 120V circuit. Do not use ungrounded systems.
Guidelines for using extension cords, including wire size requirements and condition.
Explanation of status lights: reversed clamps, charging, and charged/maintain modes.
Charge rate measured in amps, automatically adjusted by battery size for efficient charging.
Button to set battery type (Regular or AGM) for XC10-CA model.
Step-by-step guide to charge a battery while it remains in the vehicle.
Instructions for charging a battery that has been removed from the vehicle.
Details on Automatic, Aborted, Desulfation, and Maintain charging modes.
How the charger maintains 6V and 12V batteries at full charge.
Keep charger clean, coil cords, and store properly when not in use.
Addresses issues like no sparking clamps, no power, and voltage selection.
Lists input voltage, output voltage, and output current ratings for both XC6-CA and XC10-CA.
Contact customer service for troubleshooting or repair authorization (RMA).
Details the 2-year limited warranty, exclusions, and customer rights.
