To Next PageTo Next PageWhy is my Schumacher DSR PROSERIES DSR125 not charging?
If your Schumacher Battery Charger is on but not charging the connected battery, it might not be in charger mode. To start the charging process, press the START/STOP button for the battery that is connected to the charger.
What to do if Schumacher Battery Charger shows BAD BAT?
If your Schumacher Battery Charger displays “BAD BAT” along with an error code, it means the charger couldn't finish charging the battery and has entered abort mode. To resolve this, press the corresponding START/STOP button to turn off and reset the charger.
What to do if indicator lights are lit erratically on Schumacher Battery Charger?
If the indicator lights on your Schumacher Battery Charger are lit erratically, and the pattern isn't explained in the manual, it might be due to a button being pressed during plugin. Ensure nothing is touching the control panel, then unplug the unit and plug it back in to resolve the issue.
General| Brand | Schumacher |
|---|---|
| Model | DSR PROSERIES DSR125 |
| Category | Battery Charger |
| Language | English |
Highlights danger of explosive gases from batteries and lists precautions.
Step-by-step guide for connecting the charger to a battery installed in a vehicle.
Procedure for connecting the charger to a battery removed from a vehicle.
Controls for viewing battery status and selecting voltage.
Guides for selecting battery types: STD, Deep-Cycle, AGM, Gel, and LiFePO4.
Functionality to initiate or terminate the charging cycle.
List of error codes (F01-F10) with their descriptions and solutions.
Addresses issues like no charging, erratic lights, and 'BAD BAT' display with solutions.
