To Next PageTo Next PageHow to troubleshoot a Schumacher FARM & RANCH FR01335 Battery Charger that won't turn on?
If the Schumacher Battery Charger won't turn on when properly connected, the AC outlet may be dead, there may be a poor electrical connection, or the battery could be defective. Check the AC outlet for an open fuse or circuit breaker. Inspect the power cord and any extension cords for loose connections. Also, have the battery checked.
Why is my Schumacher FARM & RANCH FR01335 plugged in but not charging?
If your Schumacher Battery Charger is plugged in but not charging, it might be in tester mode. Press the START/STOP button to switch it to charge mode.
What to do if my Schumacher FARM & RANCH FR01335 has short or no start cycle?
If you experience a short or no start cycle when cranking the engine with your Schumacher Battery Charger, there could be several reasons: 1. No power at receptacle: Check for an open fuse or circuit breaker at the AC outlet. 2. Loose cords: Ensure the AC cord and any extension cords are securely plugged in. 3. Poor clamp connection: Verify a good connection at the battery and frame. 4. Insufficient rest time: Wait 3 minutes between cranking attempts. 5. Severely discharged battery: Use the boost mode for a few minutes. 6. Excessive current draw: Reduce the load on the battery during cranking. 7. Overheated charger: Ensure the charger vents are not blocked and allow it to cool down.
Why is there no reading on my Schumacher Battery Charger digital display?
If there is no reading on the digital display of your Schumacher Battery Charger, make sure the charger is plugged into a working AC outlet and check the fuse or circuit breaker. If it's still not displaying, press the Display button to turn the display back on, as it may be in sleep mode during charging.
What to do if my Schumacher Battery Charger display shows 'CONNECT CLAMPS'?
If your Schumacher Battery Charger displays 'CONNECT CLAMPS', it indicates a poor connection. Ensure the clamps are securely connected to both the battery and the vehicle frame.
Why does my Schumacher Battery Charger show 'ANALYZING BATTERY'?
If the yellow/orange CHARGING LED is solid and the display of your Schumacher Battery Charger shows ANALYZING BATTERY, it means the charger is evaluating the battery's condition. This process may take up to 5 minutes, especially if the starting voltage is below 8.0V. Allow the charger to complete this process.
What does 'BAD BATTERY' mean on my Schumacher FARM & RANCH FR01335?
If your Schumacher Battery Charger display reads 'BAD BATTERY', it means the battery is sulfated. You should have the battery checked and replace it if necessary.
What to do if Schumacher FARM & RANCH FR01335 Battery Charger displays 'CHARGE ABORTED - BAD BATTERY'?
If your Schumacher Battery Charger displays 'CHARGE ABORTED - BAD BATTERY', it indicates that the battery is sulfated, and the desulfation process has failed, or the battery is too large for the charger. Have the battery checked and replaced if needed. Alternatively, you may need a charger with a higher amp rate.
General| Model | FR01335 |
|---|---|
| Type | Battery Charger |
| Input Voltage | 120V AC |
| Weight | 9.5 lbs |
| Charging Modes | Manual, Automatic |
| Battery Types Supported | AGM, Gel |
| Battery Voltage | 6V / 12V |
| Cable Length | 6 ft |
| Battery Type | AGM, Gel |
Covers essential safety instructions for charger operation and battery handling to prevent hazards.
Highlights the severe danger of explosive gases from batteries and critical precautions to follow.
Details personal safety measures, including eye protection, clothing, and avoiding metal items near batteries.
Step-by-step guide on preparing the battery and environment before commencing the charging process.
Instructions on selecting a safe and appropriate location for the battery charger.
Essential safety precautions for connecting and disconnecting the DC output clips to the battery.
Detailed procedure for connecting the charger to a battery while it is installed inside a vehicle.
Procedure for connecting the charger to a battery that has been removed from the vehicle.
Information regarding proper grounding and AC power cord connections for safe operation.
Recommendations and requirements for using an extension cord with the battery charger.
Instructions for initial setup, including unwrapping and uncoiling the charger's cables.
Description of the ON/OFF switch and the digital display on the charger's control panel.
Explanation of how to use the display button to view different charging metrics.
How to select the appropriate charging rate for different battery types and conditions.
Operation of the start/stop button and understanding the meaning of LED indicators.
Guide to selecting the correct battery type (STD, AGM, GEL) for optimal charging.
Step-by-step instructions for charging a battery while it is installed in a vehicle.
How to use the boost mode for quick charging of severely discharged batteries.
Explanation of the charge and maintain mode for keeping batteries at full charge.
Detailed instructions on using the engine start feature to jump-start a vehicle.
Further steps and notes for using the engine start feature, including handling failures.
Understanding various display messages indicating charging status and potential issues.
Information on maintaining batteries with the charger and understanding fan operation.
Additional notes and steps for the engine start mode, including troubleshooting engine failure.
What to do when charging is aborted or when the desulfation mode is initiated.
Understanding when charging is complete and how the maintain mode operates.
Guidance on maintaining batteries long-term and ensuring proper fan operation.
Definitions of terms used to specify battery charging times and capacities.
Table showing estimated charging times for different battery sizes and types.
Detailed explanations of various messages displayed by the charger.
Instructions for cleaning and maintaining the charger and its components for longevity.
Solutions for common issues encountered with the battery charger's operation.
Further solutions for common issues, including charging, display, and engine start problems.
Information on what to do if troubleshooting fails and how to contact customer service for repairs.
Key technical specifications of the battery charger, including input and output ratings.
Details of the limited warranty, including coverage, exclusions, and limitations.
Instructions for activating the product warranty online or by mail.
Fields to be filled out on the warranty card for registration purposes.
Instructions en français pour enregistrer la garantie du produit en ligne ou par courrier.
Champs à remplir sur la carte de garantie pour l'enregistrement.
