What to do if Schumacher SC1353 shows lack of progress in Maintain mode?
If your Schumacher Battery Charger shows no progress after 12 hours in Maintain mode, it indicates the battery isn’t holding a charge. This could be due to a drain on the battery or a faulty battery. Ensure there are no loads on the battery; if present, remove them. If no loads are found, have the battery checked or replaced.
What to do if Schumacher Battery Charger voltage is too low after charging?
If, after 2 hours of charging, the battery voltage remains below 10V (for a 12V battery) or 5V (for a 6V battery), the battery may be defective. First, ensure there are no loads on the battery; if any exist, remove them. If no loads are present, have the battery inspected or replaced.
What to do if Schumacher SC1353 desulfation is unsuccessful?
If the desulfation process of your Schumacher Battery Charger is unsuccessful after 10 hours, it suggests that the battery might be defective. It is recommended to have the battery checked or replaced.
Covers safe handling, usage, and environmental conditions for the battery charger.
Details risks associated with explosive gases from lead-acid batteries and precautions.
Guidance on personal protection, battery area safety, and avoiding sparks.
Procedure for connecting the charger to a battery installed in a vehicle.
Procedure for connecting the charger to a battery outside of a vehicle.
Step-by-step guide for charging a battery while it is connected to the vehicle.
Step-by-step guide for charging a battery that has been removed from the vehicle.
Detailed descriptions and solutions for various error codes displayed by the charger.
Solutions for common issues like the charger not turning on or engine start failing.
Details the express limited warranty, exclusions, and user obligations.
General| Input Voltage | 120V AC |
|---|---|
| Output Voltage | 6V/12V |
| Microprocessor Controlled | Yes |
| Reverse Polarity Protection | Yes |
| Battery Type | AGM, Gel |
| Charging Modes | Engine Start |
To Next Page
