To Next PageTo Next PageWhat to do if the yellow/orange LED is flashing on Schumacher SC1320?
If the yellow/orange LED is flashing on your Schumacher Battery Charger, it indicates that the battery is not accepting a normal charge. In this case, you should stop attempting to charge the battery. Inspect the battery and replace it if necessary.
Why Schumacher SC1320 will not turn on?
If your Schumacher Battery Charger won't turn on when properly connected, possible causes include a dead AC outlet, a poor electrical connection, or a defective battery. Check the AC outlet's fuse or circuit breaker. Also, inspect the power cord and any extension cords for loose connections. Finally, have the battery checked.
General| Type | Automatic Battery Charger |
|---|---|
| Input Voltage | 120V AC |
| Output Voltage | 6V/12V |
| Engine Start | Yes |
| Cable Length | 6 feet |
| Testing Function | Yes |
| Charge Rate | 2A |
| Battery Type | AGM, Gel |
| Features | Reverse hook-up protection, LED indicators |
Critical warning about handling lead-acid batteries due to explosive gas risks.
Critical warnings about sparks and hazards when charging in a vehicle.
Critical warnings about sparks and hazards when charging outside a vehicle.
Explanation of the meaning of different LED indicator lights on the control panel.
Information on how the charge rate is determined and adjusted by the charger.
Key warnings and important notes before operating the charger.
Step-by-step guide for charging a battery while it's connected in the vehicle.
Step-by-step guide for charging a battery that has been removed from the vehicle.
Explains automatic, aborted, desulfation, and maintain charging modes.
Lists common problems, their causes, and solutions for the charger.
