EasyManua.ls Logo

Schumacher SC1326 - User Manual

Schumacher SC1326
40 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
0099001958-00
PLEASE SAVE THIS OWNERS MANUAL AND READ BEFORE EACH USE.
This manual will explain how to use the battery charger safely and effectively.
Please read and follow these instructions and precautions carefully.
POR FAVOR CONSERVE ESTE MANUAL DEL USUARIO Y LEALO ANTES
DE CADA USO. En este manual le explica cómo utilizar el cargador de batería
de manera segura y conable. Por favor, lea y siga las siguientes instrucciones
y precauciones.
GARDER LE MANUEL D’INSTRUCTION ET LISEZ LE AVANT CHAQUE
UTILISATION. Ce manuel explique comment utiliser le chargeur de batterie
d’une façon securitaire et efcace. S’il vous plaît lisez et suivez ces instructions
et precautions.
MODEL / MODELO / MODÈLE :
SC1326
Automatic
Battery Charger
Cargador de baterías
automático
Chargeur de batterie
automatique
OWNERS MANUAL
MANUAL DEL USUARIO
MANUEL D’UTILISATION

Table of Contents

Questions and Answers

  • G
    garciabryanAug 19, 2025
    Why my Schumacher Battery Charger will not turn on when properly connected?
    • J
      Janice JohnsonAug 19, 2025
      If your Schumacher Battery Charger won't turn on even when properly connected, the issue might stem from a few sources. The AC outlet could be dead due to an open fuse or circuit breaker, so check that first. Also, inspect the power cord and any extension cords for loose connections. Lastly, the battery itself might be defective, so consider having it checked by a professional.
  • J
    Jenna Scott MDAug 21, 2025
    Why is my Schumacher SC1326 Battery Charger on but not charging?
    • C
      Catherine Collins DDSAug 21, 2025
      If your Schumacher Battery Charger is on but not charging the battery, it might be in tester mode instead of charge mode. To fix this, press the Rate Selection button to activate the charge mode and select a rate.
  • J
    Justin AlexanderAug 25, 2025
    What to do if my Schumacher SC1326 display shows CHARGE ABORTED BAD BATTERY?
    • K
      Keith ReynoldsAug 26, 2025
      If the Schumacher Battery Charger displays 'CHARGE ABORTED BAD BATTERY', it means the battery is either sulfated (and desulfation failed) or too large for the charger. You should not continue attempting to charge this battery. Check the battery and replace it if necessary. You may need a charger with a higher amp rate.
  • M
    mcintoshjenniferAug 28, 2025
    How to fix no reading on the digital display of my Schumacher SC1326 Battery Charger?
    • C
      Charles WilliamsAug 28, 2025
      If there is no reading on the digital display of your Schumacher Battery Charger, ensure the charger is plugged into a working AC outlet. Check for any open fuse or circuit breaker that might be interrupting power to the outlet.
  • K
    keithwilsonAug 31, 2025
    What does 'CONNECT CLAMPS' mean on my Schumacher Battery Charger?
    • M
      Martin BrooksAug 31, 2025
      If the Schumacher Battery Charger display shows 'CONNECT CLAMPS', it indicates that the clamps are not making a good connection. Check for poor connection at the battery and frame.
  • N
    Nathan GrahamSep 3, 2025
    Why is the Boost LED flashing on my Schumacher SC1326 Battery Charger?
    • T
      Troy GarciaSep 3, 2025
      If the Boost LED on your Schumacher Battery Charger is flashing, it means the charger was left in Boost mode for too long. The Boost LED will flash for 30 minutes, then go off. After that, the LED will light, indicating the charger has switched to Charging mode.
  • B
    Brian HuertaSep 6, 2025
    Why does the Boost LED shut off on my Schumacher SC1326?
    • C
      Catherine BergerSep 6, 2025
      The Boost LED shutting off on your Schumacher Battery Charger is normal; it means the Boost mode is completed. The charger will automatically switch to charging mode to fully charge the battery. Alternatively, you can press the Rate Selection button and select either the 6A2A Charge/Maintain rate or Engine Start.
  • A
    Anthony JohnsonSep 8, 2025
    What does it mean when my Schumacher SC1326 Digital Display reads HIGH when testing the alternator?
    • D
      ddouglasSep 8, 2025
      If the digital display reads HIGH when testing the alternator with your Schumacher Battery Charger, it indicates that the alternator output is 14.6 volts or more. Have the electrical system checked by a qualified technician.
  • G
    Gregory FisherSep 12, 2025
    What does it mean when my Schumacher SC1326 Digital Display reads LOW when testing the alternator?
    • D
      Dr. John Bradley PhDSep 12, 2025
      If the digital display reads LOW when testing the alternator with your Schumacher Battery Charger, it indicates that the alternator output is 13.2 volts or less. Have the electrical system checked by a qualified technician.
  • S
    Stephanie CarterNov 15, 2025
    What to do if my Schumacher SC1326 has a short or no start cycle when cranking engine?
    • S
      Sean CarrilloNov 15, 2025
      If you experience a short or no start cycle when cranking the engine with the Schumacher Battery Charger, consider these potential causes and solutions: * **No power at receptacle:** Check for an open fuse or circuit breaker supplying the AC outlet. * **Loose cords:** Ensure the AC cord and/or extension cord are securely plugged in. * **Poor clamp connection:** Verify a good connection at the battery and frame. * **Insufficient rest time:** Wait 3 minutes between cranks. * **Severely discharged battery:** Use the 40A Boost rate for 10 to 15 minutes to assist in cranking. * **Excessive current draw:** If cranking draws more current than the engine start rate, crank time may be less than 5 seconds. * **Overheated charger:** Ensure the charger vents are not blocked and allow ti...

Summary

Important Safety Instructions

Save These Instructions

Manual contains important safety and operating instructions.

Damaged Cord or Plug

Handle Damaged Chargers

Unplug Before Maintenance

Unplug from the outlet before any maintenance or cleaning.

Risk of Explosive Gases Warning

Batteries generate explosive gases; follow instructions carefully.

Personal Safety Precautions

Wear Protective Gear

Handle Battery Acid Contact

Wash skin immediately; flood eyes with cold water for 10 mins.

Avoid Sparks and Flames

Never smoke or allow sparks/flames near a battery or engine.

Remove Metal Items

Battery Type Compatibility

Use only with specified lead-acid batteries (6V/12V).

Do Not Charge Frozen Batteries

Never attempt to charge a battery that is frozen.

Preparing to Charge

Battery Removal Procedure

Determine Battery Voltage

Check owner's manual; set charger voltage selector to correct voltage.

DC Connection Precautions

Disconnect Clips Safely

Connect/disconnect clips only after switches are OFF and AC cord is unplugged.

Avoid Clip Contact

Attach Clips Correctly

Attach clips to the battery and chassis as indicated.

Battery Installation in Vehicle

Determine Grounded Post

Connect for Negative Grounded Vehicle

Connect RED clip to POSITIVE ungrounded post, BLACK to chassis.

Connect for Positive Grounded Vehicle

Connect BLACK clip to NEGATIVE ungrounded post, RED to chassis.

Battery Outside Vehicle

Check Battery Polarity

Connect Positive Charger Clip

Connect POSITIVE (RED) charger clip to the POSITIVE battery post.

Disconnecting Charger Procedure

Disconnect in reverse sequence, breaking first connection away from battery.

Grounding and AC Power Cord

Grounding Requirements

Charger must be grounded via a properly installed outlet.

AC Cord and Plug Safety

Never alter AC cord or plug; use a qualified electrician for outlet issues.

Control Panel Overview

Digital Display Functions

Shows battery status, alternator percentage, or voltage.

Rate Selection Button

Selects charging rate: 6A/2A, 40A Boost, or Engine Start.

LED Indicators

Battery Type Button

Selects battery type: STD, AGM, or GEL.

Toggle Switches

Operating Instructions

Charging a Battery in the Vehicle

Steps for charging a battery while it remains installed in the vehicle.

Charging a Battery Outside the Vehicle

Steps for charging a battery that has been removed from the vehicle.

Automatic Charging Mode

Battery Connection Indicator

Battery Charging Times

Charge Completion and Maintain Mode

Maintaining a Battery

Desulfation Mode

Aborted Charge

Indicates when charging cannot be completed normally; check battery.

Using the Engine Start Setting

Procedure for using the charger to jump-start a vehicle.

Engine Starting Notes

Starting Sequence States

Using the Battery Voltage Tester

Tester and Charger Modes

Using the Alternator Performance Tester

Procedure for testing the vehicle's alternator performance.

Display Messages

Connect Clamps Message

Warning Clamps Reversed Message

Analyzing Battery Message

Charging 6 V;12 V Messages

Fully Charged Auto Maintaining Message

Engine Start Ready Message

Engine Start Cool Down Message

Charging Aborted Bad Battery Message

Battery is too sulfated, has a shorted cell, or is too large.

Troubleshooting

Charger Not Turning On

Check AC outlet, fuse, circuit breaker, and power cord connection.

Charger Not Charging Battery

Check if in tester mode, plugged in, or if receptacle has power.

No Reading on Digital Display

Alternator Test LOW Reading

Alternator output is low; have electrical system checked.

Alternator Test HIGH Reading

Alternator output is high; have charging system checked.

Analyzing Battery Display

Charging Aborted Bad Battery

Battery is sulfated or failed; check and replace battery.

Connect Clamps Display

Short or No Start Cycle

Check power, connections, wait times, battery discharge, or overheating.

Specifications

Input;Output Ratings

Limited Warranty

Warranty Terms

Two-year limited warranty against defective material or workmanship.

Warranty Exclusions

Limitation of Liability

Schumacher SC1326 Specifications

General IconGeneral
Voltage12V
Input Voltage120V AC
Output Voltage12V DC
Engine Start FeatureNo
Display TypeLED indicators
Product TypeBattery Charger
Charging ModesStandard
Battery TypeStandard, AGM, Gel
FeaturesMulti-stage charging, Reverse hook-up protection
Charging Amperage6A
Cable Length6 feet
Clamp TypeHeavy-duty
Warranty2-year limited

Related product manuals