To Next PageTo Next PageWhat to do if my Schumacher SC1301 Battery Charger won't turn on?
If your Schumacher Battery Charger won't turn on when properly connected, here are a few things to check: * **AC Outlet:** Ensure the AC outlet is working by checking for an open fuse or circuit breaker. * **Electrical Connection:** Inspect the power cord and any extension cords for loose plugs. * **Battery Condition:** The battery itself may be defective and need to be checked.
Why is the red LED lit on my Schumacher Battery Charger?
If the red LED is lit on your Schumacher Battery Charger, it could indicate several issues: * The battery may be defective, overheated, too large, have a short circuit, have low capacity, be too old, or won’t hold a charge. Have the battery checked or replaced. If the battery is overheated, allow it to cool. Also, make sure there are no loads on the battery. If there are remove them.
General| Input Voltage | 120V AC |
|---|---|
| Output Voltage | 6V/12V |
| Microprocessor Controlled | Yes |
| Reverse Polarity Protection | Yes |
| Spark Proof | Yes |
| Float Mode Monitoring | Yes |
| Type | Automatic Battery Charger |
| Battery Type | AGM, Gel |
| Cable Length | 6 ft |
| Charging Modes | Maintenance |
Alerts to explosive gases generated by batteries during normal operation.
Guidelines for handling batteries and avoiding personal injury, including eye protection and metal items.
Step-by-step instructions for connecting the charger to a battery installed in a vehicle.
Procedure for connecting the charger to a battery removed from the vehicle.
Troubleshooting common issues encountered with the battery charger.
