To Next PageTo Next PageWhat to do if the Schumacher Remote Starter display will not turn on?
If the Schumacher Remote Starter's display isn't turning on, ensure the unit is adequately charged by connecting it to a power source to reset it. Also, verify that the ON/OFF switch is in the ON position.
What to do if my Schumacher SL1314 Remote Starter turns on, but won’t jump start my vehicle?
If your Schumacher Remote Starter turns on but fails to jump start your vehicle, first check all connections to ensure they are secure. Then, verify that the jump starter's charge level is at least 40%. Avoid attempting more than three consecutive jump starts. If the vehicle remains unresponsive after these attempts, it's recommended to consult a qualified service technician.
How to fix Schumacher Remote Starter display if it will not turn on?
If the display on your Schumacher Remote Starter doesn't turn on, ensure the unit is adequately charged by connecting it to a power source to reset it. Also, verify that the ON/OFF switch is set to the ON position.
Why is the red LED solid and beeping when connected to the battery on my Schumacher SL1314 Remote Starter?
If, when the cable is connected only to the battery, you see a solid red LED (with the green LED off) and hear a beep once per second, it means the vehicle battery voltage is lower than 10.5V. You can connect to the Schumacher Remote Starter and turn the key to jump start the vehicle.
What to do if green LED is blinking and red LED is off when connected to Schumacher Remote Starter?
If, when the cable is correctly connected to both the battery and jump starter, the green LED is blinking, the red LED is off, and there is no beep, it indicates that a “fake” high battery voltage is detected, but reverse charging protection did not activate. You can turn the key to jump start the vehicle.
Why is the thermometer symbol flashing on my Schumacher Remote Starter?
If the thermometer symbol is flashing on your Schumacher Remote Starter, it indicates that the unit is either too hot or too cold. The thermometer symbol will disappear once the temperature condition is resolved.
General| Model | SL1314 |
|---|---|
| USB Ports | Yes |
| Battery Voltage | 12V |
| Type | Jump Starter |
| Battery Compatibility | 12V |
Warnings and precautions related to explosive gases generated by lead-acid batteries during operation.
Precautions against electric shock and fire hazards, including proper handling and unit condition.
Safety measures for handling lead-acid batteries, including avoiding sparks, metal objects, and acid contact.
Guidelines for extinguishing fires involving the product's lithium-ion battery and cooling the unit.
Ensure ventilation, clean terminals, check battery voltage, and secure cable connections before use.
Plug in clamps, position cables away from moving parts, check polarity, and determine grounding.
Connect positive clamp to positive post, negative clamp to chassis/engine block.
Remove clamps from chassis and battery terminal after use.
Identifies the SL1314 unit, accessories, and display elements.
Details the ON/OFF switch, USB ports, output socket, and display button.
Instructions on how to check the charge percentage using the ON/OFF switch and display.
Steps for charging the internal battery using a USB cable and charger.
Step-by-step guide for jump starting a vehicle, including connection, cranking, and post-start procedures.
Instructions for using the unit's USB ports to charge mobile devices.
Guide on how to operate the unit's LED light in different modes.
How to clean and maintain the jump starter and its components.
Guidelines for storing the unit to maintain battery health.
Common issues with the jump starter not turning on or recharging, with solutions.
Troubleshooting problems when the vehicle won't start after jump starting.
Explanation of LED indicators and their associated reasons for different behaviors.
Instructions on how to contact customer service for repairs or returns.
Technical details of the jump starter, including battery type, capacity, and outputs.
List of available replacement parts with their part numbers.
Information on the one-year limited warranty, coverage, and exclusions.
Instructions to activate the warranty online via the manufacturer's website.
Details for submitting the warranty card via mail for registration.
