What to do if my Schumacher SL1338 turns on but won't jump start my car?
If your Schumacher Remote Starter turns on but doesn't jump start your vehicle, ensure the unit is adequately charged, with a charge level of at least 50%. Avoid attempting more than three consecutive jump starts. If the vehicle remains unresponsive, it's recommended to consult a qualified service technician.
How to fix a Schumacher SL1338 that will not recharge?
If your Schumacher Remote Starter is not recharging, verify that the power source you are using is live and functioning correctly.
What to do if my Schumacher Remote Starter turns on but won’t jump start my vehicle?
First, make sure the Schumacher Remote Starter is adequately charged; verify that the charge level is at least 50%. Also, do not attempt to jump start your vehicle more than three consecutive times. If the vehicle still does not start after these attempts, it is recommended to consult a qualified service technician.
What to do if the Green LED is blinking, Red LED is off and no beep when connected to Schumacher SL1338?
If the green LED is blinking, the red LED is off, and there's no beep when the cable is correctly connected, this indicates that a 'fake' high battery voltage is detected, but reverse charging protection did not activate. In this case, you can turn the key to jump start the vehicle.
Why does the last LED flash and turn off on my Schumacher SL1338?
If the last LED flashes and then turns off on your Schumacher Remote Starter, it typically indicates an over-discharge. To resolve this, recharge the internal battery.
Why is the green LED blinking and the red LED off when the cable is correctly connected to both the battery and jump starter on my Schumacher SL1338?
This indicates that a “fake” high battery voltage is detected, but reverse charging protection did not activate. You can turn the key to jump start the vehicle.
What does it mean when the cable is connected only to the battery and the solid red LED is on, the green LED is off, and the Schumacher SL1338 beeps once per second?
This indicates that the vehicle battery voltage is lower than 10.5V. You can connect to the jump starter and turn the key to jump start the vehicle.
Why are all four LEDs flashing on my Schumacher SL1338 Remote Starter?
The LEDs are flashing because of a low or high temperature condition. The LEDs will stop flashing when the temperature condition is corrected.
What to do if the last LED flashes and then turns off on my Schumacher SL1338 Remote Starter?
This indicates an over-discharge. Recharge the internal battery of your Schumacher Remote Starter.
Covers reading manual, keeping away from children, avoiding outlet insertion, weather protection, and handling damaged units or modifications.
Focuses on using recommended attachments and safe disconnection of cords to prevent damage or injury.
Instructions on reducing risk of battery explosion, avoiding flammable materials, and not placing unit above battery.
Safety measures including no smoking, removing metal items, avoiding dropping tools, and using protective gear.
Steps for dealing with battery acid contact, including washing, eye flushing, and ingestion procedures.
Guidance on extinguishing fires involving the lithium ion battery and cooling the product.
Ensuring the battery area is ventilated and cleaning terminals with baking soda and water.
Verifying battery voltage and ensuring tight connections for the unit's cable clamps.
Steps for plugging in clamps, attaching cables to battery/chassis, and positioning DC cables safely.
Instructions for identifying battery posts and connecting clamps based on negative or positive grounding.
Procedure for safely removing clamps from the vehicle chassis and battery terminal.
Lists and identifies the main parts of the jump starter unit and included accessories.
How to check the jump starter's battery charge level using the power level LEDs.
Procedure for charging the internal battery using a USB charger and cable.
Step-by-step guide for jump starting a vehicle engine with the jump starter.
Instructions for using the USB port to charge mobile devices.
How to turn on and cycle through the different modes of the built-in LED light.
Guidelines for cleaning and maintaining the jump starter unit and its components.
Recommendations for storing the jump starter, including temperature and charging frequency.
Common problems with the jump starter and their solutions, including LED indicators.
Explanation of smart cable LED lights and alarms for various connection and protection states.
Technical details of the jump starter, including battery type, capacity, and output.
Guidance on where to find repair services and replacement parts for the unit.
Details on the one-year limited warranty and how to register the product online.
General| Brand | Schumacher |
|---|---|
| Model | SL1338 |
| Category | Remote Starter |
| Language | English |
To Next Page
