Assembly and settings
10 01.00 | IN / INK | Assembly and Operating Manual | en | 1596635
4.2 Electrical connection
CAUTION
Material damage due to incorrect bending radii!
The product may get damaged if the bending radius of the cable
is less than the minimum.
l
See catalog datasheet for corresponding details.
NOTE
l
Do not use the sensor as a safety component.
l
Do not pull on the cable of the sensor.
l
Secure the cable and connection plug so that they are not
taught and cannot move during operation.
l
Do not exceed the permitted bending radius of the cable.
l
Do not allow the sensor to come into contact with hard
objects and chemicals (e.g., nitric acid, chromic acid and
sulfuric acid).
The sensor is an electronic component that can be sensitive to
high-frequency interference or electromagnetic fields.
l
Check whether there is sufficient distance between the sensor
and sources of interference and their supply cables.
To Next Page
Loading...